START
A&B SNOOP’S PREMIUM NUTRIENTS
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
START A&B
THE SCIENCE
At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Hydro,coco,soil
START
A&B SNOOP’S PREMIUM NUTRIENTS
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
START A&B
THE SCIENCE
At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Hydro,coco,soil
START
A&B SNOOP’S PREMIUM NUTRIENTS
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
START A&B
THE SCIENCE
At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Hydro,coco,soil
START
A&B SNOOP’S PREMIUM NUTRIENTS
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
START A&B
THE SCIENCE
At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Hydro,coco,soil
START
A&B SNOOP’S PREMIUM NUTRIENTS
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
START A&B
THE SCIENCE
At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Hydro,coco,soil
HEAVY HARVEST
SNOOP’S PREMIUM NUTRIENTS
Plants work hardest during the bloom phase. They need much higher levels of phosphates (P) and potassium (K) in order to produce flowers. SNOOP’S PREMIUM NUTRIENTS HEAVY HARVEST has been formulated to work in conjunction with the levels of phosphates (P) and potassium (K) already found in SNOOP’S PREMIUM NUTRIENTS BLOOM. It is recommended to use SNOOP’S PREMIUM NUTRIENTS HEAVY HARVEST in conjunction with SNOOP’S PREMIUM NUTRIENTS BLOOM to provide your plants with the elevated levels of phosphates (P) and potassium (K) they require when flowers first start to set in the bloom phase.
DIRECTIONS:
– Suitable for use with all substrates and feeding systems.
– Use from when flowers first set until flush.
– Use in conjunction with Snoop’s Premium Nutrients Bloom.
– Shake bottle well before use.
– Add 4ml of Snoop’s Premium Nutrients Heavy Harvest per gallon of water (1ml per litre) and mix well.
– Adjust pH as required.
– Water temperature affects EC/ppm. To avoid false readings set water temperature to 68°F.
– Store out of direct light.
AVAILABLE IN:
1L, 5L, 10L & 20L.
HEAVY HARVEST
SNOOP’S PREMIUM NUTRIENTS
Plants work hardest during the bloom phase. They need much higher levels of phosphates (P) and potassium (K) in order to produce flowers. SNOOP’S PREMIUM NUTRIENTS HEAVY HARVEST has been formulated to work in conjunction with the levels of phosphates (P) and potassium (K) already found in SNOOP’S PREMIUM NUTRIENTS BLOOM. It is recommended to use SNOOP’S PREMIUM NUTRIENTS HEAVY HARVEST in conjunction with SNOOP’S PREMIUM NUTRIENTS BLOOM to provide your plants with the elevated levels of phosphates (P) and potassium (K) they require when flowers first start to set in the bloom phase.
DIRECTIONS:
– Suitable for use with all substrates and feeding systems.
– Use from when flowers first set until flush.
– Use in conjunction with Snoop’s Premium Nutrients Bloom.
– Shake bottle well before use.
– Add 4ml of Snoop’s Premium Nutrients Heavy Harvest per gallon of water (1ml per litre) and mix well.
– Adjust pH as required.
– Water temperature affects EC/ppm. To avoid false readings set water temperature to 68°F.
– Store out of direct light.
AVAILABLE IN:
1L, 5L, 10L & 20L.
HEAVY HARVEST
SNOOP’S PREMIUM NUTRIENTS
Plants work hardest during the bloom phase. They need much higher levels of phosphates (P) and potassium (K) in order to produce flowers. SNOOP’S PREMIUM NUTRIENTS HEAVY HARVEST has been formulated to work in conjunction with the levels of phosphates (P) and potassium (K) already found in SNOOP’S PREMIUM NUTRIENTS BLOOM. It is recommended to use SNOOP’S PREMIUM NUTRIENTS HEAVY HARVEST in conjunction with SNOOP’S PREMIUM NUTRIENTS BLOOM to provide your plants with the elevated levels of phosphates (P) and potassium (K) they require when flowers first start to set in the bloom phase.
DIRECTIONS:
– Suitable for use with all substrates and feeding systems.
– Use from when flowers first set until flush.
– Use in conjunction with Snoop’s Premium Nutrients Bloom.
– Shake bottle well before use.
– Add 4ml of Snoop’s Premium Nutrients Heavy Harvest per gallon of water (1ml per litre) and mix well.
– Adjust pH as required.
– Water temperature affects EC/ppm. To avoid false readings set water temperature to 68°F.
– Store out of direct light.
AVAILABLE IN:
1L, 5L, 10L & 20L.
The Hesi Starter Kits are a good value for the money. You get all of the required nutrition for your plants to thrive – conveniently packaged in one box. For beginners or experienced growers Hesi starter kits are highly recommended. Each kit includes an easy to follow grow schedule. A great way to test Hesi nutrients for the first time! Coco Kit includes:500 ml TNT Complex1 liter Hesi Coco1 liter PK 13/14500 ml Root Complex10 ml SuperVit500 ml PowerZyme
The Hesi Starter Kits are a good value for the money. You get all of the required nutrition for your plants to thrive – conveniently packaged in one box. For beginners or experienced growers Hesi starter kits are highly recommended. Each kit includes an easy to follow grow schedule. A great way to test Hesi nutrients for the first time! Soil Kit includes:1 liter Hydro Growth1 liter Hydro Bloom500 ml PK 13/14 500 ml Root Complex500 ml PowerZyme10 ml SuperVit
