Phat Filter replacement pre-filter replaces your used pre-filter to give your Phat filter longer life by filtering out larger impurities before they have a chance to enter into the actual filter. Each pre-filter is stamped with the Phat Filter logo and fits snugly over your Phat filter. The pre-filter is available in all Phat Filter sizes and can be easily slid over the filter and secured with the plastic straps provided. If your pre-filter is dirty or discolored, it’s time to change it. Contents: 1 pre-filter & 2 plastic straps.
Search Results for: filter IR
Phat Pre-Filter, 4″ x 12″ (IGSPF124PF)
Phat Filter replacement pre-filter replaces your used pre-filter to give your Phat filter longer life by filtering out larger impurities before they have a chance to enter into the actual filter. Each pre-filter is stamped with the Phat Filter logo and fits snugly over your Phat filter. The pre-filter is available in all Phat Filter sizes and can be easily slid over the filter and secured with the plastic straps provided. If your pre-filter is dirty or discolored, it’s time to change it. Contents: 1 pre-filter & 2 plastic straps.
Phat Charcoal Fiber Odor Filter, 8" (IGSCFF8)
Phat charcoal fiber odor filters feature a tightly woven 3-layer charcoal fiber technology that removes particulate matter as well as odor and gasses from the air. This super efficient, high capacity odor filter can be used with high CFM fans unlike traditional carbon filters. Perfect for scrubbing and supplemental odor control. Great back up filter for controlled, sealed rooms with high temperature triggered exhaust fans.
- Greenhouse charcoal fiber – odor & particulate filter
- Highest rated CFM on the market
- Revolutionary odor control
- Unique 3-Layer charcoal fiber technology
- Inverted nose cone and vertical pleats for maximum filtered area
- Durable & lightweight
Note: Do not clean filter with water. Blow all dust and particles out of the filter from the inside out with an air compressor. Once all dust is removed the filter is good to be used again.
Note: To increase efficacy keep filter clean and greenhouse humidity levels below 75%. High humidity will interfere with the filters ability to adsorb odors.
Phat Charcoal Fiber Odor Filter, 6" (IGSCFF6)
Phat charcoal fiber odor filters feature a tightly woven 3-layer charcoal fiber technology that removes particulate matter as well as odor and gasses from the air. This super efficient, high capacity odor filter can be used with high CFM fans unlike traditional carbon filters. Perfect for scrubbing and supplemental odor control. Great back up filter for controlled, sealed rooms with high temperature triggered exhaust fans.
- Greenhouse charcoal fiber – odor & particulate filter
- Highest rated CFM on the market
- Revolutionary odor control
- Unique 3-Layer charcoal fiber technology
- Inverted nose cone and vertical pleats for maximum filtered area
- Durable & lightweight
Note: Do not clean filter with water. Blow all dust and particles out of the filter from the inside out with an air compressor. Once all dust is removed the filter is good to be used again.
Note: To increase efficacy keep filter clean and keep greenhouse humidity levels below 75%. High humidity will interfere with the filters ability to adsorb odors.
Phat HEPA Intake Filter, 8″ (IGS8HEPA)
Phat HEPA Intake Filter, 8″
The tightly woven synthetic HEPA fibers in this filter will help prevent mold, bacteria, pollen, insects and plant pests from entering your growroom or greenhouse. The HEPA fibers block out most airborne particles down to .3 microns in diameter. That is 300 times smaller than the diameter of a human hair. This is a serious insurance filter, without it you are leaving your grow room susceptible to the elements.
Installation:
Attach your Organic Air HEPA filter to your fan or blower by sliding the rubber collar over the inlet or outlet side. Secure the filter by using the clamp provided, tighten clamp with screwdriver. Filter should be replaced every year under moderate use. Keeping the filter clean will ensure efficiency and longevity. The cleaner the area the longer this filter will last. To clean the HEPA filter use an air compressor to push air from the inside of the filter out. This will help extend the product life if excess dust is collecting on the surface.
Min/Max CFM Requirements
- 600 Min CFM
- 1500 Max CFM
Phat HEPA Intake Filter, 6″ (IGS6HEPA)
Phat HEPA Intake Filter, 6″
The tightly woven synthetic HEPA fibers in this filter will help prevent mold, bacteria, pollen, insects and plant pests from entering your growroom or greenhouse. The HEPA fibers block out most airborne particles down to .3 microns in diameter. That is 300 times smaller than the diameter of a human hair. This is a serious insurance filter, without it you are leaving your grow room susceptible to the elements.
Installation:
Attach your Organic Air HEPA filter to your fan or blower by sliding the rubber collar over the inlet or outlet side. Secure the filter by using the clamp provided, tighten clamp with screwdriver. Filter should be replaced every year under moderate use. Keeping the filter clean will ensure efficiency and longevity. The cleaner the area the longer this filter will last. To clean the HEPA filter use an air compressor to push air from the inside of the filter out. This will help extend the product life if excess dust is collecting on the surface.
Min/Max CFM Requirements
- 400 Min CFM
- 1000 Max CFM
Phat HEPA Intake Filter, 12″ (IGS12HEPA)
Phat HEPA Intake Filter, 12″
The tightly woven synthetic HEPA fibers in this filter will help prevent mold, bacteria, pollen, insects and plant pests from entering your growroom or greenhouse. The HEPA fibers block out most airborne particles down to .3 microns in diameter. That is 300 times smaller than the diameter of a human hair. This is a serious insurance filter, without it you are leaving your grow room susceptible to the elements.
Installation:
Attach your Organic Air HEPA filter to your fan or blower by sliding the rubber collar over the inlet or outlet side. Secure the filter by using the clamp provided, tighten clamp with screwdriver. Filter should be replaced every year under moderate use. Keeping the filter clean will ensure efficiency and longevity. The cleaner the area the longer this filter will last. To clean the HEPA filter use an air compressor to push air from the inside of the filter out. This will help extend the product life if excess dust is collecting on the surface.
Min/Max CFM Requirements
- 950 Min CFM
- 3,500 Max CFM
Phat HEPA Intake Filter, 4″ (IGS4HEPA)
Phat HEPA Intake Filter, 4″
The tightly woven synthetic HEPA fibers in this filter will help prevent mold, bacteria, pollen, insects and plant pests from entering your growroom or greenhouse. The HEPA fibers block out most airborne particles down to .3 microns in diameter. That is 300 times smaller than the diameter of a human hair. This is a serious insurance filter, without it you are leaving your grow room susceptible to the elements.
Installation:
Attach your Organic Air HEPA filter to your fan or blower by sliding the rubber collar over the inlet or outlet side. Secure the filter by using the clamp provided, tighten clamp with screwdriver. Filter should be replaced every year under moderate use. Keeping the filter clean will ensure efficiency and longevity. The cleaner the area the longer this filter will last. To clean the HEPA filter use an air compressor to push air from the inside of the filter out. This will help extend the product life if excess dust is collecting on the surface.
Min/Max CFM Requirements
- 150 Min CFM
- 700 Max CFM
Phat HEPA Intake Filter, 10″ (IGS10HEPA)
Phat HEPA Intake Filter, 10″
The tightly woven synthetic HEPA fibers in this filter will help prevent mold, bacteria, pollen, insects and plant pests from entering your growroom or greenhouse. The HEPA fibers block out most airborne particles down to .3 microns in diameter. That is 300 times smaller than the diameter of a human hair. This is a serious insurance filter, without it you are leaving your grow room susceptible to the elements.
Installation:
Attach your Organic Air HEPA filter to your fan or blower by sliding the rubber collar over the inlet or outlet side. Secure the filter by using the clamp provided, tighten clamp with screwdriver. Filter should be replaced every year under moderate use. Keeping the filter clean will ensure efficiency and longevity. The cleaner the area the longer this filter will last. To clean the HEPA filter use an air compressor to push air from the inside of the filter out. This will help extend the product life if excess dust is collecting on the surface.
Min/Max CFM Requirements
- 750 Min CFM
- 2000 Max CFM
Phat Elf 4″ Charcoal Carbon Filter (IGHHFSM)
Filled with 100% virgin coconut charcoal, the lightweight Elf filter is specifically designed and sized to hang inside smaller grow tents or huts. Phat filters remove the strongest and most potent plant odors. Perfect for single-pass odor control and or continuous in-room scrubbing of odors.
- 4″x10″ Carbon Filter
- 4″ Collar
- Optimal CFM Range: 150-265