HydroDynamics™ MotherPlant® A 2 – 0 – 0 & B 1 – 1- 3
MotherPlant® is a two-part nutrient formula that provides balanced nutrition for stock plants, whether grown hydroponically, in soilless mixes or soil. Exacting N-P-K ratios are calibrated to meet the nutritional requirements of the mother plant, without excess nitrates. Rich bio-organics are added to improve the uptake of nutrients and strengthen the plant’s natural immunity to environmental stress. MotherPlant® Nutrients will help your mother plants produce the most vigorous clones possible!
START
A&B SNOOP’S PREMIUM NUTRIENTS
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
START A&B
THE SCIENCE
At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Hydro,coco,soil
START
A&B SNOOP’S PREMIUM NUTRIENTS
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
START A&B
THE SCIENCE
At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Hydro,coco,soil
GROW A&B
SNOOPS PREMIUM NUTRIENTS
To reach their full potential, plants in the growth phase require a balanced intake of cations and anions. SNOOP’S PREMIUM GROW has been specifically formulated to provide your plants with the ideal proportion of nutrients for the growth phase increasing your crop’s ability to grow strong and lush. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve PREMIUM Growth.
GROW A&B
THE SCIENCE:
During the growing phase a plant needs and will take in equal amounts of anions and cations. To take in a negative ion a plant has to release an electron (−). This electron when released into water is negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. The anion mainly responsible for this reaction is NO− 3. To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a H+ particle. This H+ particle will bring the pH down in the root zone/substrate. The cations mainly responsible for this reaction are Calcium (Ca2+) and Magnesium (Mg2+). When your using SNOOP’S PREMIUM GROW a plants uptake of the negative and positive ions in the grow phase are balanced. This regulates the internal pH of the substrate as well as the pH levels you choose to feed with from your feed tank and thus keeping the pH in a range which allows the elements to be taken by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 12ml of Grow A per gallon of water (3ml per litre) and mix well. Then add 12ml of Grow B per gallon of water (3ml per litre) and mix well. This will give an approximate EC of 1.7 (1190ppm). Adjust pH as required. – You must always use an equal amount of Grow A and Grow B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Non-Circulating, Circulating & Coco.
GROW A&B
SNOOPS PREMIUM NUTRIENTS
To reach their full potential, plants in the growth phase require a balanced intake of cations and anions. SNOOP’S PREMIUM GROW has been specifically formulated to provide your plants with the ideal proportion of nutrients for the growth phase increasing your crop’s ability to grow strong and lush. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve PREMIUM Growth.
GROW A&B
THE SCIENCE:
During the growing phase a plant needs and will take in equal amounts of anions and cations. To take in a negative ion a plant has to release an electron (−). This electron when released into water is negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. The anion mainly responsible for this reaction is NO− 3. To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a H+ particle. This H+ particle will bring the pH down in the root zone/substrate. The cations mainly responsible for this reaction are Calcium (Ca2+) and Magnesium (Mg2+). When your using SNOOP’S PREMIUM GROW a plants uptake of the negative and positive ions in the grow phase are balanced. This regulates the internal pH of the substrate as well as the pH levels you choose to feed with from your feed tank and thus keeping the pH in a range which allows the elements to be taken by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 12ml of Grow A per gallon of water (3ml per litre) and mix well. Then add 12ml of Grow B per gallon of water (3ml per litre) and mix well. This will give an approximate EC of 1.7 (1190ppm). Adjust pH as required. – You must always use an equal amount of Grow A and Grow B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Non-Circulating, Circulating & Coco.
GROW A&B
SNOOPS PREMIUM NUTRIENTS
To reach their full potential, plants in the growth phase require a balanced intake of cations and anions. SNOOP’S PREMIUM GROW has been specifically formulated to provide your plants with the ideal proportion of nutrients for the growth phase increasing your crop’s ability to grow strong and lush. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve PREMIUM Growth.
GROW A&B
THE SCIENCE:
During the growing phase a plant needs and will take in equal amounts of anions and cations. To take in a negative ion a plant has to release an electron (−). This electron when released into water is negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. The anion mainly responsible for this reaction is NO− 3. To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a H+ particle. This H+ particle will bring the pH down in the root zone/substrate. The cations mainly responsible for this reaction are Calcium (Ca2+) and Magnesium (Mg2+). When your using SNOOP’S PREMIUM GROW a plants uptake of the negative and positive ions in the grow phase are balanced. This regulates the internal pH of the substrate as well as the pH levels you choose to feed with from your feed tank and thus keeping the pH in a range which allows the elements to be taken by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 12ml of Grow A per gallon of water (3ml per litre) and mix well. Then add 12ml of Grow B per gallon of water (3ml per litre) and mix well. This will give an approximate EC of 1.7 (1190ppm). Adjust pH as required. – You must always use an equal amount of Grow A and Grow B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Non-Circulating, Circulating & Coco.
GROW A&B
SNOOPS PREMIUM NUTRIENTS
To reach their full potential, plants in the growth phase require a balanced intake of cations and anions. SNOOP’S PREMIUM GROW has been specifically formulated to provide your plants with the ideal proportion of nutrients for the growth phase increasing your crop’s ability to grow strong and lush. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve PREMIUM Growth.
GROW A&B
THE SCIENCE:
During the growing phase a plant needs and will take in equal amounts of anions and cations. To take in a negative ion a plant has to release an electron (−). This electron when released into water is negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. The anion mainly responsible for this reaction is NO− 3. To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a H+ particle. This H+ particle will bring the pH down in the root zone/substrate. The cations mainly responsible for this reaction are Calcium (Ca2+) and Magnesium (Mg2+). When your using SNOOP’S PREMIUM GROW a plants uptake of the negative and positive ions in the grow phase are balanced. This regulates the internal pH of the substrate as well as the pH levels you choose to feed with from your feed tank and thus keeping the pH in a range which allows the elements to be taken by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 12ml of Grow A per gallon of water (3ml per litre) and mix well. Then add 12ml of Grow B per gallon of water (3ml per litre) and mix well. This will give an approximate EC of 1.7 (1190ppm). Adjust pH as required. – You must always use an equal amount of Grow A and Grow B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Non-Circulating, Circulating & Coco.
GROW A&B
SNOOPS PREMIUM NUTRIENTS
To reach their full potential, plants in the growth phase require a balanced intake of cations and anions. SNOOP’S PREMIUM GROW has been specifically formulated to provide your plants with the ideal proportion of nutrients for the growth phase increasing your crop’s ability to grow strong and lush. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve PREMIUM Growth.
GROW A&B
THE SCIENCE:
During the growing phase a plant needs and will take in equal amounts of anions and cations. To take in a negative ion a plant has to release an electron (−). This electron when released into water is negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. The anion mainly responsible for this reaction is NO− 3. To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a H+ particle. This H+ particle will bring the pH down in the root zone/substrate. The cations mainly responsible for this reaction are Calcium (Ca2+) and Magnesium (Mg2+). When your using SNOOP’S PREMIUM GROW a plants uptake of the negative and positive ions in the grow phase are balanced. This regulates the internal pH of the substrate as well as the pH levels you choose to feed with from your feed tank and thus keeping the pH in a range which allows the elements to be taken by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 12ml of Grow A per gallon of water (3ml per litre) and mix well. Then add 12ml of Grow B per gallon of water (3ml per litre) and mix well. This will give an approximate EC of 1.7 (1190ppm). Adjust pH as required. – You must always use an equal amount of Grow A and Grow B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Non-Circulating, Circulating & Coco.
GROW A&B
SNOOPS PREMIUM NUTRIENTS
To reach their full potential, plants in the growth phase require a balanced intake of cations and anions. SNOOP’S PREMIUM GROW has been specifically formulated to provide your plants with the ideal proportion of nutrients for the growth phase increasing your crop’s ability to grow strong and lush. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve PREMIUM Growth.
GROW A&B
THE SCIENCE:
During the growing phase a plant needs and will take in equal amounts of anions and cations. To take in a negative ion a plant has to release an electron (−). This electron when released into water is negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. The anion mainly responsible for this reaction is NO− 3. To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a H+ particle. This H+ particle will bring the pH down in the root zone/substrate. The cations mainly responsible for this reaction are Calcium (Ca2+) and Magnesium (Mg2+). When your using SNOOP’S PREMIUM GROW a plants uptake of the negative and positive ions in the grow phase are balanced. This regulates the internal pH of the substrate as well as the pH levels you choose to feed with from your feed tank and thus keeping the pH in a range which allows the elements to be taken by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 12ml of Grow A per gallon of water (3ml per litre) and mix well. Then add 12ml of Grow B per gallon of water (3ml per litre) and mix well. This will give an approximate EC of 1.7 (1190ppm). Adjust pH as required. – You must always use an equal amount of Grow A and Grow B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Non-Circulating, Circulating & Coco.
GROW A&B
SNOOPS PREMIUM NUTRIENTS
To reach their full potential, plants in the growth phase require a balanced intake of cations and anions. SNOOP’S PREMIUM GROW has been specifically formulated to provide your plants with the ideal proportion of nutrients for the growth phase increasing your crop’s ability to grow strong and lush. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve PREMIUM Growth.
GROW A&B
THE SCIENCE:
During the growing phase a plant needs and will take in equal amounts of anions and cations. To take in a negative ion a plant has to release an electron (−). This electron when released into water is negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. The anion mainly responsible for this reaction is NO− 3. To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a H+ particle. This H+ particle will bring the pH down in the root zone/substrate. The cations mainly responsible for this reaction are Calcium (Ca2+) and Magnesium (Mg2+). When your using SNOOP’S PREMIUM GROW a plants uptake of the negative and positive ions in the grow phase are balanced. This regulates the internal pH of the substrate as well as the pH levels you choose to feed with from your feed tank and thus keeping the pH in a range which allows the elements to be taken by the plant.
DIRECTIONS
Fill the feed tank with water. Shake bottle well before use. Add 12ml of Grow A per gallon of water (3ml per litre) and mix well. Then add 12ml of Grow B per gallon of water (3ml per litre) and mix well. This will give an approximate EC of 1.7 (1190ppm). Adjust pH as required. – You must always use an equal amount of Grow A and Grow B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific.
AVAILABLE IN:
1L, 5L, 10L & 20L.
VARIANTS:
Non-Circulating, Circulating & Coco.
