PEAKBOOST
Peakboost along with its sibling product Finaleboost make up the Aptus flower development and bulking solution. Perhaps the most noticeable implementation of the Third Pillar of Aptus Philosophy: Mineral Antagonism, Peakboost moves the vast majority of phosphorous used during the bloom cycle solely into one product. With this formulation, Aptus has allowed for absolute control of heightened phosphorus application throughout the specific phases of a plant’s growth cycle.
The specific application of plant-available phosphorous allows for optimal health by removing the negative antagonistic effects of less effective commercial bulk products containing high amounts of both phosphorous and potassium. With Aptus Peakboost, you will see the difference in your final harvest by having optimal plant-available phosphorous with the elements usually antagonized away including: zinc, iron and copper fully present.
Directions for use:
• Use during weeks 2-6 during flowering at 6-16 ml per 5 gallons. Do not use during weeks 7 and 8 of flowering
• To stave off purple stems in veg, feed at 1 ml per gallon with the Aptus vegetative feeding chart if needed.
BLOOMBOOST
Aptus Bloomboost is an additive used throughout the entirety of the fruiting and flowering periods of a plants lifespan. Bloomboost contains a blend of plant available elements including potassium, sulfur, and boron that work together to increase fruit/flower size, fiber mass, and quality. Aptus has designed this product to provide these three elements in precise amounts at desired times during the plants’ reproductive cycles to maximize harvests.
Bloomboost is an excellent all-in-one nutrient supplement for your plants during their reproductive growth phase. Using Bloomboost throughout the fruiting and flowering phases of growth allows for increased flower vigor, heightened aroma, and larger harvests.
Directions for use:
• Use at the rate of 4 to 8 ml per 5 gallons increasing every week from week 2 of flowering onwards until week 8.
• For increased effect, you may use it at the rate of 1 ml per 2.5l. Ensure your active PPM allows for this increased dosage before implementing.
BLOOMBOOST
Aptus Bloomboost is an additive used throughout the entirety of the fruiting and flowering periods of a plants lifespan. Bloomboost contains a blend of plant available elements including potassium, sulfur, and boron that work together to increase fruit/flower size, fiber mass, and quality. Aptus has designed this product to provide these three elements in precise amounts at desired times during the plants’ reproductive cycles to maximize harvests.
Bloomboost is an excellent all-in-one nutrient supplement for your plants during their reproductive growth phase. Using Bloomboost throughout the fruiting and flowering phases of growth allows for increased flower vigor, heightened aroma, and larger harvests.
Directions for use:
• Use at the rate of 4 to 8 ml per 5 gallons increasing every week from week 2 of flowering onwards until week 8.
• For increased effect, you may use it at the rate of 1 ml per 2.5l. Ensure your active PPM allows for this increased dosage before implementing.
Active Air Carbon Filters are loaded with virgin activated Australian granular carbon. This carbon adsorbs VOC’s (volatile organic compounds) therefore trapping every odor molecule that passes through the filter onto the micro-porous carbon surface. These filters are light weight and incredibly effective at removing the most potent and dankest odors. Each filter is machine packed and includes a pre-filter.
• Attached flange
• 1.8″ carbon bed depth
• Powder coated aluminum tops & bases
• Life expectancy up to two years, depending on environmental factors.
Active Air Carbon Filters are loaded with virgin activated Australian granular carbon. This carbon adsorbs VOC’s (volatile organic compounds) therefore trapping every odor molecule that passes through the filter onto the micro-porous carbon surface. These filters are light weight and incredibly effective at removing the most potent and dankest odors. Each filter is machine packed and includes a pre-filter.
• Attached flange
• 1.8″ carbon bed depth
• Powder coated aluminum tops & bases
• Life expectancy up to two years, depending on environmental factors.
Active Air Carbon Filters are loaded with virgin activated Australian granular carbon. This carbon adsorbs VOC’s (volatile organic compounds) therefore trapping every odor molecule that passes through the filter onto the micro-porous carbon surface. These filters are light weight and incredibly effective at removing the most potent and dankest odors. Each filter is machine packed and includes a pre-filter.
• Attached flange
• 1.8″ carbon bed depth
• Powder coated aluminum tops & bases
• Life expectancy up to two years, depending on environmental factors.
Cyco Hydro Clay is certified as a growing media through the RAL “Quality Assurance Association,” therefore it is a substrate approved and used for plant cultivation. Cyco Hydro Clay is tested monthly by RAL and GGS to ensure the highest-quality clay is produced. Can be used as a top dressing for plants to reduce evaporative losses, reduce algae, fungus gnats and unwanted weeds. It can also be used as a bottom drainage layer or full pot medium for potted plants, to provide adequate run off, maintain ideal rhizopheric root conditions and increase the physical stability of plants.
Conductivity meter electrodes invariably become coated with inorganic or organic impurities. This causes a loss of accuracy. Conductivity (cF, mS) or TDS measurements are used to gauge the total concentration of all salts (i.e. both beneficial and toxic) present in the nutrient solution. They cannot provide any detail on the concentrations of individual nutrients. Therefore, since a “satisfactory” reading does not imply a balanced nutrient mixture (or provide information on the level of nuisance salts), it is wise to dump every 7–14 days. For calibration of conductivity (EC) and TDS meters calibrates to 2.76mS/cm or cF 27.6 at 25°C (77°F). Contains potassium chloride.
Conductivity meter electrodes invariably become coated with inorganic or organic impurities. This causes a loss of accuracy. Conductivity (cF, mS) or TDS measurements are used to gauge the total concentration of all salts (i.e. both beneficial and toxic) present in the nutrient solution. They cannot provide any detail on the concentrations of individual nutrients. Therefore, since a “satisfactory” reading does not imply a balanced nutrient mixture (or provide information on the level of nuisance salts), it is wise to dump every 7–14 days. For calibration of conductivity (EC) and TDS meters calibrates to 2.76mS/cm or cF 27.6 at 25°C (77°F). Contains potassium chloride.
CYCO XL
Super phosphoric acid is produced from phosphates by reacting with sulphuric acid. The acid is reacted with alkaline salts to produce purified phosphates. Plants need phosphorus and phosphorus-containing compounds as they play a vital role in photosynthesis. Super phosphoric acid also aids in root development and helps increase the uptake of iron, nitrogen and potassium. Cyco XL used in the early stages of growth (not recommended before week 3) of a plant’s growth stage will help with the uptake of the above mentioned elements and increase root growth rapidly. Any increase in root growth will increase the amount of root hairs on your plant to allow for more absorption of water and nutrients.
