Phantom Low Profile, DE Open Commercial Lighting System, 1000W, 120/240V (PHDEOK12L)

Phantom DE 1000 LP is designed and built for low profile applications were overhead clearance is limited. Phantom DE 1000 LP Lighting System features proprietary Phantom reflector designs that uniformly deliver optimum PPFD over a broad footprint.

The Phantom DE Low Profile Lighting System is an excellent choice for a range of applications. It combines a Phantom reflector with a controllable Phantom DE Low Profile ballast and a 2100 µmol/s PHANTOM PRO DE high-pressure sodium lamp (excluding NL systems). This commercial-grade system allows users to adjust light levels for their particular setup and photoperiod. This system is able to be operated remote or attached, and is available in both open and enclosed reflector configurations. Both are made from multifaceted 95% reflective hammertone aluminum.

• Enclosed System (PHDESK12L): The enclosed-form reflector provides downward-focused output that maximizes light intensity. This provides ideal canopy illumination PPFD and uniformity of coverage.

• Open System (PHDEOK12L): The open-form reflector delivers uniform growth over a broad footprint. The louvered design effectively dissipates heat while operating DE bulbs at ideal temperatures for maximum light output and lamp life.

*Fixture and lamp comform to California 2022 Bulding Energy Efficiency Standards for Residential and Nonresidential Buildings, California Title 24, part 6, section 120.6, (h) Mandatory requirements for Controlled Environment Horticulture (CEH) spaces, 2. Indoor growing, horticultural lighting.; and 6. Greenhouses, horticultural lighting.

FEATURES:

Under 5″ low profile design for indoor low clearance applications
Phantom Commercial DE Ballast with RJ port for use with Autopilot PX series digital controllers
PHANTOM PRO DE 2100 µmol/s HPS lamp
Comes assembled and attached, but adaptable to remote operation
On-board knob provides 5 light settings: 60%, 75%, 82.5%, 100% & 115%
Eyebolt hanging points, wire hangers included
95% reflective European specular hammertone
Includes a 120V power cord. 240V cord is optional

Phantom Low Profile, DE Enclosed Commercial Lighting System, 1000W, 120/240V (PHDESK12L)

• Enclosed System (PHDESK12L): The enclosed-form reflector provides downward-focused output that maximizes light intensity. This provides ideal canopy illumination PPFD and uniformity of coverage.

FEATURES:

Under 5″ low profile design for indoor low clearance applications
Phantom Commercial DE Ballast with RJ port for use with Autopilot PX series digital controllers
PHANTOM PRO DE 2100 µmol/s HPS lamp
Comes assembled and attached, but adaptable to remote operation
On-board knob provides 5 light settings: 60%, 75%, 82.5%, 100% & 115%
Eyebolt hanging points, wire hangers included
95% reflective European specular hammertone
Includes a 120V power cord. 240V cord is optional

PHOTOBIO MX LED, 680W, 100-277V S4 spectrum w/ iLOC, (10′ 208-240V cord) (PTB7680LS42)

Extraordinary performance. Extreme efficiency. Exacting design.

The PHOTOBIO•MX changes everything. We took a step back, evaluated all the fixtures on the market, and then set out to do things entirely different. The result is a 680W fixture delivering 15% more light to your canopy, using 35% less power than a 1000W DE fixture. Increase yields while driving down operational cost. The spectrums were developed in a private research laboratory to drive flower yield and elicit market desirable traits in short day resin producing crops.

PHOTOBIO•MX abandons the bar style concept in favor of a more efficient contiguous circuit board to deliver unparalleled PPFD uniformity to the canopy. Extensive thermal modeling and testing was conducted to ensure diodes remain well below operating temperature to maintain consistent light output and yields. 0-10V PHOTO•LOC Light Output Control allows you to precisely regulate the amount of light delivered to your plant canopy when paired with the available Autopilot PX Series controller.

The iLOC Integrated Light Output Control on board dimming knob allows the grower to adjust the photon output intensity to accommodate the various stages of plant growth for optimal photosynthesis activation. With the knob adjusted to 100% using 240V, the MX uses 664W and puts out 1700 μmol/s photon flux (PPF). With the knob adjusted to 40%, the MX uses 270W and puts out 40% of the photon flux. The high efficiency S4 spectrum does not change when using the dimmer knob and still provides ideal red to blue ratio for vigorous growth and maximized flower development.

PHOTOBIO•MX design is multilayer rack centric, providing the ability to double or triple your canopy square footage within your existing structures footprint. The driver is mounted below the fixture to maximize vertical grow space and has the ability to be remotely mounted.

PHOTOBIO•MX is for serious horticultural professionals looking to increase business sustainability by reducing power consumption while simultaneously improving crop performance and yield. The PHOTOBIO•MX is also a qualified product listed with DLC, which makes the fixture eligible for energy rebates for futher cost savings while also saving significant energy while optimizing plant growth and health.

FEATURES:

1768 umol/s Photon Flux @ 277V
2.6 µmol/J Efficacy @ 277V
iLOC Integrated Light Output Control allows manual adjustment of light output
Dim Settings are 40%-55%-70%-85%-100%-PX Control
Precisely control photon output when paired with Autopilot PX series controller (PX2 and above)
Slim design maximizes vertical growing space with remote capable driver
Robust commercial design keeps LED’s running cool
Auto adjusting 100-277V driver input range
IP65 rated protection against water and dust
Includes PHOTO•LOC DC signal cable
DLC listed (H-RR6RGRH) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project
Fully compatible with optional PHOTOBIO AC Power Distribution Tree cabling system – enables interconnection of multiple fixtures on a single power drop – reducing electrical infrastructure costs*
Fully compatible with optional PHOTOBIO DC Communications Tree cabling system – enables interconnection of multiple fixtures on a centralized controller

*Recommended consultation of a licensed electrician working with electrical engineer following applicable electrical code and inspections.

PHOTOBIO TX LED, 680W, 100-277V S4, (10′ 208-240V Cord) (PTB5680LS42)

PHOTOBIO•TX high efficiency LED top light is designed for greenhouse and indoor applications. The slim design minimizes sun interference while providing greater access to the plant canopy. The ultra-effective commercial design utilizes a closed loop heat pipe cooling system to rapidly wick heat from diodes, providing superior heat dissipation and longevity. The high efficiency S4 spectrum provides ideal conditions for both human and plant health to deliver better working conditions and consistent crop quality. This fixture allows horticulture professionals increased performance and yields while maximizing ROI.

Features:

1768 umol/s Photon Flux @ 277V
2.6 µmol/J Efficacy @ 277V
Thin linear top light design minimizes sun interference in greenhouses while providing better canopy access when applied indoors
Highly effective heat pipe cooling system provides superior heat dissipation
Precisely control photon output when paired with Autopilot PX series controller (PX2 and above)
Driver can be mounted remote
IP65 rated protection against water and dust
Auto adjusting 100-277V driver input range
DLC listed (H-8BP06EV) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project

Fully compatible with optional PHOTOBIO AC Power Distribution Tree cabling system – enables interconnection of multiple fixtures on a single power drop – reducing electrical infrastructure costs*

Fully compatible with optional PHOTOBIO DC Communications Tree cabling system – enables interconnection of multiple fixtures on a centralized controller

*Recommended consultation of a licensed electrician working with electrical engineer following applicable electrical code and inspections.

PHOTOBIO T LED, 330W, 100-277V S4, (10′ 208-240V Cord) (PTB3330LS42)

PHOTOBIO•T high efficiency LED top light is designed for greenhouse and indoor applications. The slim design minimizes sun interference while providing greater access to the plant canopy. The ultra-effective commercial design utilizes a closed loop heat pipe cooling system to rapidly wick heat from diodes, providing superior heat dissipation and longevity. The high efficiency S4 spectrum provides ideal conditions for both human and plant health to deliver better working conditions and consistent crop quality. This fixture allows horticulture professionals increased performance and yields while maximizing ROI.

Features:

858 umol/s Photon Flux @ 277V
2.6 µmol/J Efficacy @ 277V
Ideal for sole source indoor and supplemental greenhouse applications
Thin linear top light design minimizes sun interference in greenhouses while providing better canopy access when applied indoors
Highly effective heat pipe cooling system provides superior heat dissipation
Precisely control photon output when paired with Autopilot PX series controller (PX2 and above)
Driver can be mounted remote
IP65 rated protection against water and dust
Auto adjusting 100-277V driver input range
DLC listed (H-3WMUH6G) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project
Fully compatible with optional PHOTOBIO AC Power Distribution Tree cabling system – enables interconnection of multiple fixtures on a single power drop – reducing electrical infrastructure costs*
Fully compatible with optional PHOTOBIO DC Communications Tree cabling system – enables interconnection of multiple fixtures on a centralized controller

*Recommended consultation of a licensed electrician working with electrical engineer following applicable electrical code and inspections.

Gavita CMH 630e 208-240 3100k Lamp (906053)

The Gavita Pro 630e SE is available with the Philips 315 watt 3000° Kelvin lamps (for flowering) or 4200° Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

Gavita CMH 315e 208-240 3100k Lamp (906048)

The Gavita Pro 315e SE is available with the Philips 315 watt 3000° Kelvin lamps (for flowering) or 4200° Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.

Gavita Pro E-Series 1000e DE Slim Line – 208-240 Volt (906117)

Gavita Pro E-Series 1000e DE Slim Line – 208-240 Volt

Only 9.7 inch high makes the ‘Slim Line’ the shortest 240 volt Gavita fixture ever. Highest light output and maintenance over time. It has the HR96 or W150 reflector for the maximum efficiency and uniformity. Highly efficient passive cooling of ballast for a longer lifetime of the electronics. Sealed housing with Gore-Tex® ventilation plug and controllable output up to 1150 Watt. Equipped with Repeater Bus interface which is a double-port connector on the ballast that allows you to directly daisy chain 100 fixtures per string and five strings per controller port to connect a maximum of 500 fixtures per controller port.

Accessories included in box:
111954	Power Cord US 240 Volt IEC C13 2.5 m/8 ft
906014	Gavita Kit – Eye Bolts
CB6626321	Gavita Interconnect Cable for Repeater Bus Gray 6P6C 2 m/6.5 ft
Accessories sold separately:
906051	Gavita E-Series 240V IEC Power Cord w/ Ferrite 16 ft
MC2092	Gavita 1-5/8 in Mounting Bracket Assembly Kit
906013	Gavita 2 in Mounting Bracket Assembly Kit
906120	Gavita Master Controller EL1 – Gen 2
906121	Gavita Master Controller EL2 – Gen 2
906118	Gavita Master Controller EL1F
906119	Gavita Master Controller EL2F
906170	Gavita Repeater Bus Connection Kit

California Lightworks SolarXtreme 1000, 240V (CLW4102)

California Lightworks SolarXtreme 1000W, 240V

The SolarXtreme 1000 is an easy to use full-spectrum LED grow light designed especially for grow tents and smaller-scale home growing. Covering 25 square feet, it is one of California Lightworks most productivity-enhancing LED grow lights.

The SolarXtreme series uses a revolutionary new generation of COB (chip on board), as well as new direct AC drive technology, which eliminates the need for LED drivers that can turn large LED lights into energy guzzlers. This offers high-efficiency LEDs at a much lower cost than traditional LEDs. This fixture puts out a full spectrum suitable for all phases of growth without the need for adjusting.

Our newest horticultural LED lights suit different types of growing operations. If you’re looking for full-spectrum LED lights to use indoors, this is one of the most efficient and effective products on the market.

A low heat signature not only conserves energy but protects your yield as well. Precise controls enable you to use the SolarXtreme 1000 with all types of indoor plants, flowers, and vegetables. This system enables more yield per power draw than any other indoor LED grow lights built for such a wide range of yields and applications.

Phantom 40 Series, DE Enclosed Lighting System, 1000W, 120V-240V (PHDEKTS2)

Performance, Quality & Reliability: Introducing The Commercial DE Enclosed Lighting System

The Commercial Enclosed DE Lighting System is state-of-the-art double-ended technology that uniformly delivers optimum PAR value over a broad footprint. This system gives you the unique ability to remove the ballast from the reflector so it can be used remotely, allowing you to operate the ballast outside of your grow room, to effectively reduce heat load.

At the heart of this system is the Phantom Commercial DE Ballast. It is designed with a high precision microprocessor that makes it highly efficient and extremely reliable. It is totally silent and lightweight. Its USB interface enables connection with the Autopilot PX1 Digital Lighting Controller (APDPX1). The PX1 provides centralized, dual-zone digital control of your DE lighting, allowing you to switch, dim and boost multiple (USB-compatible) Hydrofarm ballasts at once-up to 256 in each of two independent zones for a total capacity of 512 ballasts.

The ballast model included in this system, PHB4010, is capable of multi-voltage operation (120V/208V/240V). It is generator ready, FCC-compliant, and comes with USB to RJ12 cable, RJ12 to RJ12 cable, RJ12 splitter, an 8-foot power cord, and instructions.

Rounding out this kit are our PHRS010 Enclosed reflector and a European-made premium DE lamp with a rated PAR output of 2100 μmol/s.

PHB4010 Ballast Features:

High-precision microprocessor control
Four-way dimming: 60%, 75%, 100%, and Super Boost (1150W lamp output)
USB interface provides full compatibility with Autopilot PX1 Digital Lighting Controller
Robust commercial design
Superior reliability
LED status indicator
Internal RF shielding
Patented ignition control
End of lamp life signal
Auto-restrike feature protects valuable lamps from damaging power interruptions
Cooling fins for maximum heat dissipation
Suitable for use in damp locations
Features an IEC power connection and comes with a 8′ 120V 14/3 AWG power cord
FCC certified
120V/208V/240V

REFLECTOR-PHRS010 Features:

Double-ended system delivers higher PAR value with incredible uniformity
Patented open roof design for ideal lamp operational temperature
Premium aluminum European hammertone interior: 99.85% pure, 95% reflectivity
Directs light down in a focused pattern
Compact design minimizes interference with sun in greenhouse applications
Excellent efficiency at higher mounting heights
Requires fewer reflectors to meet desired light levels
Compounding performance in multi-light configurations
European-made VS K12 x 30s high temperature lamp holders
Patented reflector design: D731,109 (and other patents pending)

Premium DE lamp features:

High proportions of red and blue light guarantee efficient photosynthesis
Excellent PAR output (2100 μmol/s)
Quartz glass outer jacket for superior optical quality
Lamp design eliminates shadowing from arc tube support
Designed for use with Hydrofarm and PARsource high frequency DE fixtures and ballasts

CSXCORD: Lock & Seal lamp cord extension allows for remote operation up to 15′ (sold separately)