GREE LIVO+ 24,000 BTU Mini Split with Heat Pump 208-230V Kit, Bundle -TW12421S
The 16-SEER GREE LIVO High Efficiency Ductless Mini-Split Heat Pump system is compact, quiet and comes in a variety of sizes to heat and cool any room. The LIVO outdoor compressor section is powered by a twin rotary compressor with GREE’s DC Inverter technology. This inverter technology with eco-friendly R-410a refrigerant to saves you energy, reduces outdoor noise and keeps room temperature steady by eliminating the constant starts and stops of conventional air conditioning systems.
The LIVO+ indoor unit is designed to be a comfortable fit in virtually any living space. The unobtrusive front panel features a virtually hidden digital LED display, and the unit operates quietly, day after day.
This Kit code includes the indoor air handler and the outdoor compressor units.
*A 5/8” line-set (sold separately) is required for installation – item code TW75825L
Features
- 22,000 BTU cooling and 23,000 BTU heating for powerful temperature control
- Heat or cool up to 1,100 sq. ft. to keep your living space comfortable
- G10 inverter technology allows the system to ramp up or slow down avoiding frequent starts and stops resulting in a more comfortable climate and better air quality
- Digital thermostat read-out on both unit and remote to set to desired temperature
- Low-decibel operation won’t interfere with normal conversation
- Waterfall heating and cooling via auto-rotating deflectors
- I Feel function senses the temperature surrounding the remote control to adjust airflow and indoor temperature
- Blue fin condenser coil coating helps prevent corrosion and leads to longer life
- Wi-Fi ready (sold separately, item code TW60060A)
- Controller ready (sold separately, item code TW60030A)
- ETL Listed and AHRI Certified
*Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty.
CA Prop 65 Warning Applies to this product
For submittals, spec sheets, install manuals, certificates, and more, please visit https://www.greecomfort.com/resources/dealer-resources-current-product/
![PHOTOBIO X3, 340W, 100-277V, S4 spectrum [Be sure to select your power cord from the options below.] PTB9340LS4](https://www.horticulturesource.com/fresh/wp-content/uploads/2023/03/PTB9340LS4_1.jpg?x10805 "PHOTOBIO X3, 340W, 100-277V, S4 spectrum [Be sure to select your power cord from the options below.] PTB9340LS4")
PHOTOBIO•X3 340W 100-277V S4 Spectrum
PHOTOBIO•X abandons the bar style concept in favor of a more efficient contiguous circuit board where proprietary spacing between diodes is optimized to deliver unparalleled PPFD uniformity to the canopy. A highly reflective panel between the boards redirect photons reflected off leaf surfaces back down to the canopy which equates to a 2% increase in PPFD. Extensive thermal modeling and testing was conducted to ensure diodes remain well below operating temperature to maintain consistent light output and yields for over a decade. 0-10V PHOTO•LOC Light Output Control allows you to precisely regulate the amount of light delivered to your plant canopy when paired with the available Autopilot PX2 controller.
PHOTOBIO•X’s design is multilayer rack centric, providing the ability to double or triple your canopy square footage within your existing structures footprint. The driver is mounted below the fixture to maximize vertical grow space and has the ability to be remotely mounted.
PHOTOBIO•X is designed for the serious horticultural professional looking to increase business sustainability by reducing power consumption while simultaneously improving crop performance and yield.
- 850 μmol per second output (S4 Spectrum)
- Over 2.6 μmol per joule efficiency (S4 Spectrum)
- Tailored spectrum produces desirable crop traits
- 11 year diode life operating 12 hours per day
- Highly reflective panels redirect photons back to canopy to increase PPFD by 2% versus bar style fixtures
- Strategic diode placement increases uniformity of light delivery to canopy
- PHOTO•LOC Light Output Control to precisely control PPF output when paired with Autopilot PX2 controller
- Low profile maximizes vertical growing space with remote capable driver
- 100–480V Driver options
- IP65 wet location rated protection against water and dust
- Zero maintenance
At the heart of this system is the PHB5020 Phantom Commercial DE Ballast with USB Interface. Its USB interface enables connection with the Autopilot PX Series Advanced Lighting Controllers.
*Fixture comforms to California 2022 Bulding Energy Efficiency Standards for Residential and Nonresidential Buildings, California Title 24, part 6, section 120.6, (h) Mandatory requirements for Controlled Environment Horticulture (CEH) spaces, 2. Indoor growing, horticultural lighting.; and 6. Greenhouses, horticultural lighting.
PHB5020 Ballast features:
- USB interface provides full compatibility with Autopilot PX Series Digital Lighting Controller
- High-precision microprocessor control
- Six-way wattage output control: 600W, 750W, 825W, 1000W, and 1150W + PX1 control mode
- Robust commercial design
- Superior reliability
- LED status indicator
- Internal RF shielding
- Patented ignition control
- End of lamp life signal
- Auto-restrike feature protects valuable lamps from damaging power interruptions
- Cooling fins for maximum heat dissipation
- Suitable for use in damp locations
- Includes a pre-wired 8′ 16/3 AWG power cord with EMI suppression and NEMA L7-15P twist lock plug
- Includes 15′ USB-RJ12 Controller Cable Pack
Open Reflector features:
- Double-ended system delivers higher PAR value with excellent uniformity
- Open design for maximum light output, optimum heat management, and longer lamp life
- Premium aluminum European hammertone interior: 99.85% pure, 95% reflectivity
- Provides a broad, consistent light spread
- Compact design minimizes interference with sun in greenhouse applications
- The ideal reflector choice for lower mounting heights
- Requires fewer reflectors to meet desired light levels
- Highly efficient in overlapping multi-light configurations
- European-made VS K12 x 30s high temperature lamp holders
- Patented reflector design: D731,109 (and other patents pending)
Note: Lamp is not included with this system.
Commercial Dirt Pots by RediRoot
Designed to maximize airflow to the root zone, Commercial Dirt Pots by RediRoot feature a lightweight yet durable fabric that provides effective and efficient air root pruning for plants and trees. These bags are known to produce a dense fibrous root structure, reduce circling roots, and increase yields.
Commercial Dirt Pots by RediRoot have reinforced stitching to ensure their durability through multiple growing seasons. A dark green top-stitch helps the bag stay open for easier filling. While other bags degrade after a single season, these lightweight fabric bags can be reused multiple times, and they even resist salt damage! Made from 80% recycled materials, and BPA-free.
Features
- Reinforced stitching for durability
- Top stitching to allow for easier filling
- Breathable and reusable fabric
- Handles available on sizes #3-#30
- Made from recycled materials
- BPA-free and UV resistant
Product capacity and dimensions
| HF Item Number | Description | Each Dry Gal Volume | Each Width Inches | Each Depth Inches | Each Height Inches |
|---|
| HGDRRDP1 | Commercial Dirt Pot by RediRoot #1, pack of 10 | 0.9 | 7 | 7 | 6 |
| HGDRRDP2 | Commercial Dirt Pot by RediRoot #2, pack of 10 | 1.3 | 8 | 8 | 7 |
| HGDRRDP3 | Commercial Dirt Pot by RediRoot #3, pack of 10 | 3.4 | 12 | 12 | 8 |
| HGDRRDP5 | Commercial Dirt Pot by RediRoot #5, pack of 10 | 4.7 | 13 | 13 | 10 |
| HGDRRDP7 | Commercial Dirt Pot by RediRoot #7, pack of 5 | 6.9 | 14 | 14 | 12 |
| HGDRRDP10 | Commercial Dirt Pot by RediRoot #10, pack of 5 | 11.4 | 18 | 18 | 12 |
| HGDRRDP15 | Commercial Dirt Pot by RediRoot #15, pack of 5 | 16.5 | 20 | 20 | 14 |
| HGDRRDP20 | Commercial Dirt Pot by RediRoot #20, pack of 5 | 19.5 | 21 | 21 | 15 |
| HGDRRDP30 | Commercial Dirt Pot by RediRoot #30, pack of 5 | 31.5 | 26 | 26 | 16 |
| HGDRRDP45 | Commercial Dirt Pot by RediRoot #45, pack of 5 | 38.4 | 27 | 27 | 18 |
| HGDRRDP65 | Commercial Dirt Pot by RediRoot #65, pack of 5 | 53.9 | 32 | 32 | 18 |
| HGDRRDP100 | Commercial Dirt Pot by RediRoot #100 | 84.4 | 38 | 38 | 20 |
| HGDRRDP150 | Commercial Dirt Pot by RediRoot #150 | 132.1 | 45 | 45 | 22 |
| HGDRRDP200 | Commercial Dirt Pot by RediRoot #200 | 175.4 | 50 | 50 | 24 |
| HGDRRDPH3 | Commercial Dirt Pot by RediRoot #3 with handles, pack of 10 | 3.4 | 12 | 12 | 8 |
| HGDRRDPH5 | Commercial Dirt Pot by RediRoot #5 with handles, pack of 10 | 4.7 | 13 | 13 | 10 |
| HGDRRDPH7 | Commercial Dirt Pot by RediRoot #7 with handles, pack of 5 | 6.9 | 14 | 14 | 12 |
| HGDRRDPH10 | Commercial Dirt Pot by RediRoot #10 with handles, pack of 5 | 11.4 | 18 | 18 | 12 |
| HGDRRDPH15 | Commercial Dirt Pot by RediRoot #15 with handles, pack of 5 | 16.5 | 20 | 20 | 14 |
| HGDRRDPH20 | Commercial Dirt Pot by RediRoot #20 with handles, pack of 5 | 19.5 | 21 | 21 | 15 |
| HGDRRDPH30 | Commercial Dirt Pot by RediRoot #30 with handles, pack of 5 | 31.5 | 26 | 26 | 16 |
Attention: Dyna-Gro labels are being rebranded as SuperTHRIVE. During this transitional period, you may receive products with labels branded as either Dyna-Gro or SuperTHRIVE. The formulas, ingredients, and dosage rates are the same on both labels. Only the branding has changed.
Dyna-Gro Bloom 3-12-6 is a low nitrogen, high phosphorus formula containing all 6 essential macronutrients and all 10 essential micronutrients that plants need. It is formulated to encourage development of large, vibrant blooms and is ideal for roses, orchids, African violets, and other flowering plants. Apply before flower buds appear to fully support flowering.
![CenturionPro GC1 Bucker [Quick ship item. Normally ships within 48 business hours.] SPECIAL ORDER CPSB7001](https://www.horticulturesource.com/fresh/wp-content/uploads/2023/03/CPSB7001_1.jpg?x10805 "CenturionPro GC1 Bucker [Quick ship item. Normally ships within 48 business hours.] SPECIAL ORDER CPSB7001")
CenturionPro GC1 Bucker
GC refers to “Gentle Cut” as we appreciate and understand how delicate flowers are. This bucker cuts the flowers off the stem, which prevents the large crown buds from breaking apart into smaller pieces. This keeps the structure of the buds fully intact preserving the look of the flower. The GC Buckers are the industry’s first and only bucking machines designed specifically for use on dry product, but work great on wet product also.
The GC1 accepts stems up to 3/8″ in diameter and can do the work of 2-3 human workers and will process up to 40 pounds–per hour–of fully hydrated flowers! The GC1 has a 0.25hp motor that produces over 3000 cuts per minute, making it the perfect tabletop machine. Plus, it is easy to set up, clean and requires little maintenance!
SPECS
Input Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase
Current Draw: < 3A Operating
Dimensions: 27.5″ L x 15″ W x 18″ H
Weight: 65 lbs | 29.5 kg
Motor: 0.25 hp | 1750 RPM
Circuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V
Human Worker Replacement: 2-3 people
Feed Rate: Wet: up to 40 lbs/hr | Dry: up to 8 lbs/hr
Feed Entry Sizes: 3-Hole (3/16”, 1/4”, 3/8”)
Feed Type: Wet/Dry
Primary Materials: 304 Stainless Steel / Aluminum
Warranty: 5 years
![CenturionPro HP1 Bucker [Quick ship item. Normally ships within 48 business hours.] SPECIAL ORDER CPSB7000](https://www.horticulturesource.com/fresh/wp-content/uploads/2023/03/CPSB7000_1.jpg?x10805 "CenturionPro HP1 Bucker [Quick ship item. Normally ships within 48 business hours.] SPECIAL ORDER CPSB7000")
CenturionPro HP1 Bucker
HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine and pop the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming and results in the industry’s highest buck rate per hour.
The HP1 comes with a bucker stand and table-top set-up legs included for added value and versatility. With 5-hole sizes, the HP1 accepts wet or dry stems up to 3/4” and can buck up to 175 pounds (up to 35 lbs/hr dry) per hour, replacing 5-7 human workers. When combined with the high productivity of the CenturionPro trimming machines, you’ll get the highest capacity harvesting system in the world! The HP1 comes complete with a 0.75 HP gear driven motor with variable speeds to provide unsurpassed power and adjustability. Thanks to the variable speed controls, both wet and dry products can be processed with ease! The system is easy to set up and is made of stainless steel and anodized aluminum making it robust as well as easy to clean. The HP1 plugs into a 110-volt, 15-amp circuit – EU/AUS Compatible. Backed by a 5 years warranty. The HP1 bucker is simple, powerful, and effective and will process product at an unprecedented rate.
The bucker stand comes standard with industrial casters.
SPECS
Input Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase
Current Draw: < 2.5A Operating
Dimensions: 32.5″ L x 37″ W x 59″ H
Weight: 198 lbs | 90 kg
Drive Motor: 0.75 hp, IP54 | 1690 RPM
Circuit Breaker Required: NA: 15A/120V | EU, AUS: 15A/220V
Human Worker Replacement: 5-7 people
Feed Rate: Wet: up to 175 lbs/hr | Dry: up to 35 lbs/hr
Feed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2″, 3/4″)
Feed Type: Wet/Dry
Roller Sets: Neoprene Rubber
Variable Speed: Yes
Motor Pulse: Yes
Reverse Operation: Yes
Duty Cycle: Continuous
Pull Speed: 10-30 in/s
Pull Strength: > 400 lbs
Primary Materials: 304 Stainless Steel / Aluminum
Warranty: 5 years
The Autopilot PX1 Digital Lighting Controller from HF provides centralized, dual-zone digital control of your DE lighting, allowing you to switch, dim and boost multiple USB-compatible HF ballasts at once—up to 256 in each of two independent zones for a total capacity of 512 ballasts. The trunk-line cable connections ensure perfect communication between the controller and all ballasts in the chain.
The PX1 has two dedicated temperature sensors—one for each zone—that provide real-time data for automated temperature-based dimming, as well as a high temperature shutdown feature that protects your garden while you’re away. The PX1 replaces traditional analog lighting relays, and eliminates inrush current. Each of its dual zones provides precise and independent:
- Photoperiod timing to control light and dark cycles
- Wattage output control, which allows users to control the intensity of the light being emitted from fixtures
- Auto-dimming when temperature exceeds set points
- Emergency auto-shutdown of lights upon user-defined over-temperature events
- Configurable restrike delay times, which eliminates lamp-damaging hot starts
- Sunrise/sunset simulation settings, which provide a gradual ramp-up and down at both ends of your photoperiod
- Features a built-in battery backup
- Voltage: 120-240V Amps: 0.3A
- Includes 2 – 19.5′ temperature probes
- Includes 8′ 100V/240V, 50/60 Hz power adapter
The PX1 Digital Lighting Controller is easy to set up, and is compact and lightweight. It is a true digital ballast interface that makes multiple-ballast control easy and affordable to achieve. It is simply more powerful, more reliable, and more capable than competing controllers. The PX1 is designed to work with any Phantom or HF ballasts with USB connectivity, and are ideally paired with PARsource DE reflectors and Agrosun DE HPS lamps. Xtrasun ballasts are not compatible with PX1.
RJ12/USB connection cables and splitter are included in the ballast box.
NOTE:
- To extend the temperature probe use a 3.5mm Male to Female audio cable, 50’ max extension cable length.
- Only use authorized RJ12 6 Conductor Telephone Cables when running your connections between ballasts and the PX1. Non-approved cables could cause errors and disrupt the signals to your lights.
IMPORTANT: The PX1 MUST be set to the Status Display Page (Run Mode) to perform programmed operations. Once any settings you create have been saved, you must return the PX1 to the Status Page (Run Mode) to resume programmed operation. If the display is left on any page other than the Status Display Page, the PX1 will be in an idle mode and will not be able to follow user-programmed settings.
PX1 is not compatible with Xtrasun ballasts
The Autopilot PPM-5 CO2 Controller is a simple and affordable way to control your CO2 injection device. Choose your desired CO2 parts per million (PPM) level, and the controller will automatically maintain that specified CO2 level. A built-in photocell located on the right side of the sensor automatically deactivates CO2 injection during the night time, and the unit’s digital display shows live CO2 levels. The display is green in color, which will not disturb photoperiod. A remote sensor with detachable 16′ cable allows close placement to the plant canopy.
FEATURES:
- Monitor & Control CO2 levels
- Photocell deactivates CO2 device during night cycle
- Digital display shows current CO2 levels 24/7
- Detachable 16 ft sensor cable
NOTE: If a longer sensor cable is desired use optional replacement:
- APRJ1250 – Autopilot 50′ RJ12 Cable
- OR replace with an RJ12 6 Conductor Telephone Cable at desired length
*This product is currently on backorder. Some alternate item codes that we offer are APC8200, APE3100 and NBPNG060. This note will be removed when inventory is available.
Help your Active Air fan operate at its most efficient and effective capacity by installing a corresponding Active Air flange. Available in sizes that match our entire line of Active Air filters, the flanges include sealing foam and six screws for an easy fit. Flanges connect to ducting, not directly to the fans themselves. Regular flanges come in 4″, 5″, 6″, 8″, 10″, and 12″. Wide-mount flanges are also available, in 6″ and 8″ sizes for specific Active Air filters. Don’t lose valuable air cooling or invite in dust, dirt, and other airborne particules — create a secure connection with your Active Air flange.
NOTE: Flange will fit ducting, not directly onto fan intake. For a flange that does fit fan intake, use Can Fan flanges, in Related Items below.
