GrowoniX BP-1000 HF Adjustable Booster Pump
GrowoniX · GrowoniX Booster Pumps
High Pressure Booster Pump doubles the flow rate of the reverse osmosis system. Low pressure cutoff switch safeguards the pump against loss of water pressure. Supplied with piggyback cord for use with electric shutoff kit. Manufactured for continuous duty and years of trouble-free use. GOBP-6010 works with any GOEX/GOGX600/1000 reverse osmosis system. Special Order Item.
This system is capable of producing more than 1000 GPD or 42 gallons per hour of pure water. Remove 94%+ of all parts per million from your tap water. Can produce up to 1500 GPD at 80 PSI with an optional booster pump. Save more water by running 2:1 waste to product water ratio, or optional 1:1 ratio (included). Includes custom KDF/catalytic carbon filter for reduction of chlorine, chloramine, iron, sulfur and heavy metals. Simple and quick setup.
Combine with Hydro-Logic PreEvolution High Capacity Pre-Filter (HGC728792) to ensure your Evolution RO1000 runs more efficiently. Protect the RO membranes and extend their life. Less filter changes and maintenance – every 7,500 gallons of purified water. Cleanable sediment filter is re-usable. Combination of KDF85 and the KDF55 with eco-friendly catalytic carbon filter reduces chlorine, chloramines, iron, sulfur, and heavy metals. – great for city or well water. Highly recommended when using more than 150 gallons of purified water per week on average.
Pre-Filter System
HGC728792 Hydro-Logic PreEvolution High Capacity Pre-Filter
Pre Filter
HGC741642 Hydro-Logic Pre-Evolution Sediment Filter Pleated/Cleanable
Carbon Filter
HGC741701 Hydro-Logic PreEvolution Catalytic Carbon/KDFfilter (8/cs)
HGC741640 Hydro-Logic PreEvolution Chlorashield
HGC728772 Evolution-RO™ ChloraShield®
Membrane
HGC728774 Hydro-Logic Evolution RO1000 Membrane
Accessories
HGC728880 Hydro-Logic Pressure Booster Pump Evolution RO Continuous Use / Heavy Duty
HGC728914 Hydro-Logic Float Valve QC 3/8 in for Evolution RO 1000 and Tall Boy
HGC741666 (HL 24017) Hydro-Logic Wrench Stealth RO Double ended
HGC728905 Hydro-Logic Flowmaster Flow Meter 3/8 in
HGC728910 Hydro-Logic Evolution RO Pressure Regulator 1/2Inches brass, adjustable 0-125 psi
The BP-6010-CH booster pump doubling the water production at 150psi (standard tuning). Only needs 30psi of incoming water pressure to double the flow rate of any EX/GX600/1000 reverse osmosis system. Low pressure cutoff switch safeguards the pump against loss of water pressure. Supplied with piggyback cord for use with electric shutoff kit (ESOK-34). Manufactured for continuous duty and years of trouble free use.
GOBP-6010 works for any GOEX/GOGX600/1000 reverse osmosis system.
This little pump will raise the input water pressure to 78psi on every GrowoniX reverse osmosis filter up to 600GPD—even if you have only 10psi to start with! Adjustable output pressure, designed for continuous duty, and armed with overheat protection; Built in high pressure cutoff allows for easy use with float valves or faucets. 12000 hours of brush life makes this little pump an industry standard workhorse
Works with: EX-100,GX-150/200-HF/300/400-HF Booster Pump
The stealthRO Pressure Booster Pump increases the flow and efficiency of the StealthRO 100 water filtration system, boosting inlet pressure to 70 psi. The stealthRO needs inlet pressure between 40 and 80 psi, so for gardeners with low water pressure or who simply want to maximize the efficiency of their system, this quiet-running, high-quality pump is a necessity.
This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.
This is the intermittent duty version of the booster pump. It can boost inlet pressure up to 60 PSI. Designed to boost low pressure situations below 40 PSI. This pump is not designed for continuous duty, but rather for shorter run times of a few hours. It has a thermal protective microprocessor that allows the pump to shut down for periods to protect it from overheating. It comes with a heat sink, 1/2 in quick connect fittings and a 115 V plug. Designed to be used with the Merlin Garden Pro or any other system with 1/2 in inlet and 3/8 in outlet.