TNB Naturals The Enhancer
The Enhancer is an all natural CO2 generator made from 100% natural ingredients. This safe and effective solution for CO2 supplementation creates a blast of CO2 that can reach 1200 PPM in a 12’x12’x12’ area for up to 2 weeks. Activate The Enhancer by adding 1 litre of warm water, placing the lid back on, removing the sticker on the lid, covering the small hole with your thumb and giving the bottle a quick shake. The Enhancer works off the natural phenomena known as photosynthesis and will begin to disperse CO2 within a few minutes of being activated. For optimal performance shake The Enhancer once a day in a 12’x12’x12′ area and once every second day in a 6’x6’x6′ area. The simplicity and ease of use, along with the fact that The Enhancer does not produce heat or require any additional equipment, makes this the future of CO2 production.
- Always Fresh
- Water Activated
- Hits High PPM’s
- Inexpensive Start-Up
- Doesn’t Produce Heat
- No Equipment Needed
- Slows CO2 Release At Night
The Enhancer CO2 – Set Up Instructions
1). Remove lid and add 1 litre (4 cups) of lukewarm water.
2). Place lid back on and remove the sticker.
3). Shake canister well while covering the hole on lid.
4). Hang the canister above the desired plants in an upright position.
CO2 being a heavier air will cascade down over the plants.Place an oscillating fan to evenly spread the CO2 around the room. Higher CO2 levels allow the plants to handle higher temperatures. If exhausting, place The Enhancer as far away from the vent as possible.
TNB Naturals The Enhancer Refill Pack
The Enhancer now comes in a convenient refill pack! The TNB CO2 Refill Pack gives growers the ability to reuse their existing Enhancer bottle while saving money and reducing their environmental footprint at the same time. Simply empty the contents of the original bottle and give the bottle a quick rinse. The contents of the Refill Pack can be added and instantly CO2 is once again available for use. Boosting plant production and improving overall health, CO2 is an essential element of photosynthesis and often one of the most overlooked components of plant growth. The TNB CO2 Refill Pack consists of the same great recipe while combining convenience and an amazing option for those looking for passive CO2. Research has shown that plants can use up to five times the CO2 that naturally occurs in the air. With The Enhancer known for delivering levels of CO2 only comparable to a propane or natural gas burner, there is no question many growers will be turning in their tanks and introducing CO2 with this safer and all natural method.
Our product is made from all-natural, 100% organic ingredients, which when activated create a blast of CO2 that can reach 1200 ppm in a 12 ft x 12 ft x 12 ft area. TNB Naturals CO2 Dispersal Canister is the best and most efficient way to get the proper amount of CO2 in your greenhouse, tent or indoor garden. This product will eliminate the need for dangerous propane burners and regulating equipment. This brilliant way of delivering CO2 into the atmosphere is all natural and just takes lukewarm water to activate. Each canister lasts up to two weeks and has the potential to double production on all plants. TNB Naturals Enhancer has outperformed the competition in all tests and studies. It’s as simple as that! The Enhancer works of the natural phenom know as photosynthesis and will begin to disperse CO2 within 8 to 10 hours. Giving the Enhancer a quick shake every day or two is all that this miraculous product requires. At the end of the two week lifespan, simply recycle the canister and grab another. You won’t believe your eyes as you watch your plants’ health and overall yield increase dramatically.
Botanicare® Slide Bench System
Premium components, innovative design, and hundreds of configurations for flexible, adaptable, wall-to-wall coverage.
Two tray options to grow your way – Our Original Grow Trays or New Gutter Trays
Gutter Trays amplify airflow with 23% more potential airspace versus our OG Trays
** Orders with Gutter Tray will begin shipping the week of June 12, 2023 **
Irrigation accessories and TriLock included with Slide Bench + Gutter Tray combination
OG Trays offer a continuous surface for maximum plant spacing flexibility.
Irrigation accessories (clips) NOT included with OG trays. Available for purchase separately.
Note: Orders of Slide Bench + OG Trays have the option of TriLock OR the Standard Trellising Support. This integrated feature secures tray seams and accepts 3/4″ PVC & 1″ EMT conduit for trellising structures. Designed to stay within 4’ and 5’ OD and support a fully-caged trellis system.
The Botanicare® Slide Bench
The Botanicare Slide Bench is a versatile, modular system that provides complete grow space control. This system allows growers to modify length, optional working height, variable aisle width and drainage slope to adapt to any growing style, greenhouse or room size.
Sturdy 1” x 2” powder-coated steel frame and tray support create maximum stability and allow for 25 lb per sq ft load rating. Reinforced roller connectors provide smooth travel and won’t deform under pressure, while the secured anti-tip bar with bump-stops prevents tipping when loaded.
- Available height options: 12”, 20” and 30”.
- Built-in slope/height adjustments up to 5" for 20" and 30" options, 2.5" for 12" option.
- Extend the length of your 7'6" base system in 2', 3', 4' and 5' increments (currently up to 100'6")*
- 8.5" of travel from center provides a minimum aisle width of 17".
- Compatible with both Botanicare Original Grow Trays and Botanicare Gutter Trays.
*Benching longer than 60.5” will require review by your Sales Rep and our Tech Team
Botanicare® Slide Bench System
Premium components, innovative design, and hundreds of configurations for flexible, adaptable, wall-to-wall coverage.
Two tray options to grow your way – Our Original Grow Trays or New Gutter Trays
Gutter Trays amplify airflow with 23% more potential airspace versus our OG Trays
** Orders with Gutter Tray will begin shipping the week of June 12, 2023 **
Irrigation accessories and TriLock included with Slide Bench + Gutter Tray combination
OG Trays offer a continuous surface for maximum plant spacing flexibility.
Irrigation accessories (clips) NOT included with OG trays. Available for purchase separately.
Note: Orders of Slide Bench + OG Trays have the option of TriLock OR the Standard Trellising Support. This integrated feature secures tray seams and accepts 3/4″ PVC & 1″ EMT conduit for trellising structures. Designed to stay within 4’ and 5’ OD and support a fully-caged trellis system.
The Botanicare® Slide Bench
The Botanicare Slide Bench is a versatile, modular system that provides complete grow space control. This system allows growers to modify length, optional working height, variable aisle width and drainage slope to adapt to any growing style, greenhouse or room size.
Sturdy 1” x 2” powder-coated steel frame and tray support create maximum stability and allow for 25 lb per sq ft load rating. Reinforced roller connectors provide smooth travel and won’t deform under pressure, while the secured anti-tip bar with bump-stops prevents tipping when loaded.
- Available height options: 12”, 20” and 30”.
- Built-in slope/height adjustments up to 5" for 20" and 30" options, 2.5" for 12" option.
- Extend the length of your 7'6" base system in 2', 3', 4' and 5' increments (currently up to 100'6")*
- 8.5" of travel from center provides a minimum aisle width of 17".
- Compatible with both Botanicare Original Grow Trays and Botanicare Gutter Trays.
*Benching longer than 60.5” will require review by your Sales Rep and our Tech Team
Botanicare® Slide Bench System
Premium components, innovative design, and hundreds of configurations for flexible, adaptable, wall-to-wall coverage.
Two tray options to grow your way – Our Original Grow Trays or New Gutter Trays
Gutter Trays amplify airflow with 23% more potential airspace versus our OG Trays
** Orders with Gutter Tray will begin shipping the week of June 12, 2023 **
Irrigation accessories and TriLock included with Slide Bench + Gutter Tray combination
OG Trays offer a continuous surface for maximum plant spacing flexibility.
Irrigation accessories (clips) NOT included with OG trays. Available for purchase separately.
Note: Orders of Slide Bench + OG Trays have the option of TriLock OR the Standard Trellising Support. This integrated feature secures tray seams and accepts 3/4″ PVC & 1″ EMT conduit for trellising structures. Designed to stay within 4’ and 5’ OD and support a fully-caged trellis system.
The Botanicare® Slide Bench
The Botanicare Slide Bench is a versatile, modular system that provides complete grow space control. This system allows growers to modify length, optional working height, variable aisle width and drainage slope to adapt to any growing style, greenhouse or room size.
Sturdy 1” x 2” powder-coated steel frame and tray support create maximum stability and allow for 25 lb per sq ft load rating. Reinforced roller connectors provide smooth travel and won’t deform under pressure, while the secured anti-tip bar with bump-stops prevents tipping when loaded.
- Available height options: 12”, 20” and 30”.
- Built-in slope/height adjustments up to 5" for 20" and 30" options, 2.5" for 12" option.
- Extend the length of your 7'6" base system in 2', 3', 4' and 5' increments (currently up to 100'6")*
- 8.5" of travel from center provides a minimum aisle width of 17".
- Compatible with both Botanicare Original Grow Trays and Botanicare Gutter Trays.
*Benching longer than 60.5” will require review by your Sales Rep and our Tech Team
Botanicare® Slide Bench System
Premium components, innovative design, and hundreds of configurations for flexible, adaptable, wall-to-wall coverage.
Two tray options to grow your way – Our Original Grow Trays or New Gutter Trays
Gutter Trays amplify airflow with 23% more potential airspace versus our OG Trays
** Orders with Gutter Tray will begin shipping the week of June 12, 2023 **
Irrigation accessories and TriLock included with Slide Bench + Gutter Tray combination
OG Trays offer a continuous surface for maximum plant spacing flexibility.
Irrigation accessories (clips) NOT included with OG trays. Available for purchase separately.
Note: Orders of Slide Bench + OG Trays have the option of TriLock OR the Standard Trellising Support. This integrated feature secures tray seams and accepts 3/4″ PVC & 1″ EMT conduit for trellising structures. Designed to stay within 4’ and 5’ OD and support a fully-caged trellis system.
The Botanicare® Slide Bench
The Botanicare Slide Bench is a versatile, modular system that provides complete grow space control. This system allows growers to modify length, optional working height, variable aisle width and drainage slope to adapt to any growing style, greenhouse or room size.
Sturdy 1” x 2” powder-coated steel frame and tray support create maximum stability and allow for 25 lb per sq ft load rating. Reinforced roller connectors provide smooth travel and won’t deform under pressure, while the secured anti-tip bar with bump-stops prevents tipping when loaded.
- Available height options: 12”, 20” and 30”.
- Built-in slope/height adjustments up to 5" for 20" and 30" options, 2.5" for 12" option.
- Extend the length of your 7'6" base system in 2', 3', 4' and 5' increments (currently up to 100'6")*
- 8.5" of travel from center provides a minimum aisle width of 17".
- Compatible with both Botanicare Original Grow Trays and Botanicare Gutter Trays.
*Benching longer than 60.5” will require review by your Sales Rep and our Tech Team
Botanicare® Slide Bench System
Premium components, innovative design, and hundreds of configurations for flexible, adaptable, wall-to-wall coverage.
Two tray options to grow your way – Our Original Grow Trays or New Gutter Trays
Gutter Trays amplify airflow with 23% more potential airspace versus our OG Trays
** Orders with Gutter Tray will begin shipping the week of June 12, 2023 **
Irrigation accessories and TriLock included with Slide Bench + Gutter Tray combination
OG Trays offer a continuous surface for maximum plant spacing flexibility.
Irrigation accessories (clips) NOT included with OG trays. Available for purchase separately.
Note: Orders of Slide Bench + OG Trays have the option of TriLock OR the Standard Trellising Support. This integrated feature secures tray seams and accepts 3/4″ PVC & 1″ EMT conduit for trellising structures. Designed to stay within 4’ and 5’ OD and support a fully-caged trellis system.
The Botanicare® Slide Bench
The Botanicare Slide Bench is a versatile, modular system that provides complete grow space control. This system allows growers to modify length, optional working height, variable aisle width and drainage slope to adapt to any growing style, greenhouse or room size.
Sturdy 1” x 2” powder-coated steel frame and tray support create maximum stability and allow for 25 lb per sq ft load rating. Reinforced roller connectors provide smooth travel and won’t deform under pressure, while the secured anti-tip bar with bump-stops prevents tipping when loaded.
- Available height options: 12”, 20” and 30”.
- Built-in slope/height adjustments up to 5" for 20" and 30" options, 2.5" for 12" option.
- Extend the length of your 7'6" base system in 2', 3', 4' and 5' increments (currently up to 100'6")*
- 8.5" of travel from center provides a minimum aisle width of 17".
- Compatible with both Botanicare Original Grow Trays and Botanicare Gutter Trays.
*Benching longer than 60.5” will require review by your Sales Rep and our Tech Team
Botanicare® Slide Bench System
Premium components, innovative design, and hundreds of configurations for flexible, adaptable, wall-to-wall coverage.
Two tray options to grow your way – Our Original Grow Trays or New Gutter Trays
Gutter Trays amplify airflow with 23% more potential airspace versus our OG Trays
** Orders with Gutter Tray will begin shipping the week of June 12, 2023 **
Irrigation accessories and TriLock included with Slide Bench + Gutter Tray combination
OG Trays offer a continuous surface for maximum plant spacing flexibility.
Irrigation accessories (clips) NOT included with OG trays. Available for purchase separately.
Note: Orders of Slide Bench + OG Trays have the option of TriLock OR the Standard Trellising Support. This integrated feature secures tray seams and accepts 3/4″ PVC & 1″ EMT conduit for trellising structures. Designed to stay within 4’ and 5’ OD and support a fully-caged trellis system.
The Botanicare® Slide Bench
The Botanicare Slide Bench is a versatile, modular system that provides complete grow space control. This system allows growers to modify length, optional working height, variable aisle width and drainage slope to adapt to any growing style, greenhouse or room size.
Sturdy 1” x 2” powder-coated steel frame and tray support create maximum stability and allow for 25 lb per sq ft load rating. Reinforced roller connectors provide smooth travel and won’t deform under pressure, while the secured anti-tip bar with bump-stops prevents tipping when loaded.
- Available height options: 12”, 20” and 30”.
- Built-in slope/height adjustments up to 5" for 20" and 30" options, 2.5" for 12" option.
- Extend the length of your 7'6" base system in 2', 3', 4' and 5' increments (currently up to 100'6")*
- 8.5" of travel from center provides a minimum aisle width of 17".
- Compatible with both Botanicare Original Grow Trays and Botanicare Gutter Trays.
*Benching longer than 60.5” will require review by your Sales Rep and our Tech Team
Botanicare® Slide Bench System
Premium components, innovative design, and hundreds of configurations for flexible, adaptable, wall-to-wall coverage.
Two tray options to grow your way – Our Original Grow Trays or New Gutter Trays
Gutter Trays amplify airflow with 23% more potential airspace versus our OG Trays
** Orders with Gutter Tray will begin shipping the week of June 12, 2023 **
Irrigation accessories and TriLock included with Slide Bench + Gutter Tray combination
OG Trays offer a continuous surface for maximum plant spacing flexibility.
Irrigation accessories (clips) NOT included with OG trays. Available for purchase separately.
Note: Orders of Slide Bench + OG Trays have the option of TriLock OR the Standard Trellising Support. This integrated feature secures tray seams and accepts 3/4″ PVC & 1″ EMT conduit for trellising structures. Designed to stay within 4’ and 5’ OD and support a fully-caged trellis system.
The Botanicare® Slide Bench
The Botanicare Slide Bench is a versatile, modular system that provides complete grow space control. This system allows growers to modify length, optional working height, variable aisle width and drainage slope to adapt to any growing style, greenhouse or room size.
Sturdy 1” x 2” powder-coated steel frame and tray support create maximum stability and allow for 25 lb per sq ft load rating. Reinforced roller connectors provide smooth travel and won’t deform under pressure, while the secured anti-tip bar with bump-stops prevents tipping when loaded.
- Available height options: 12”, 20” and 30”.
- Built-in slope/height adjustments up to 5" for 20" and 30" options, 2.5" for 12" option.
- Extend the length of your 7'6" base system in 2', 3', 4' and 5' increments (currently up to 100'6")*
- 8.5" of travel from center provides a minimum aisle width of 17".
- Compatible with both Botanicare Original Grow Trays and Botanicare Gutter Trays.
*Benching longer than 60.5” will require review by your Sales Rep and our Tech Team
