Titan Controls® Spartan Series® CO2 Controller/Monitor
Built to the high levels of quality Titan Controls® is known for, the Spartan Series® CO2 Controller/Monitor allows you to supercharge your garden at an affordable price. Capable of controlling both a CO2 regulator or a CO2 generator, this controller gives you precise control over the ppm levels in your garden. Using a Dual Beam NDIR (Non-Dispersive Infrared) sensor, you can monitor your CO2 levels up to 3000 ppm. The unit will also monitor your temperature as well. A built-in photocell ensures that CO2 is only dispersed during the daylight time. The plastic housing resists dust and moisture. 15 Amps Maximum/120 V/60 Hz.
Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room’s CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200’s memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot!
FEATURES:
- Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming
- Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution
- Adjustable Trend Chart Zoom levels let you trace your ppm levels
- Remote CO2 sensor probe w/photocell & 15′ data cable lets you take readings from proper grow room locations
- 2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
- Green LED identification lights inform you of the unit’s status at all times
APC8200 Error Codes:
| Fault Icon | Description of the fault | Suggested Actions |
| Err4 | IR lamp error | Please reconnect power adapter, if the Err4 still appears, please contact the service department. |
| Err5 | Internal parameter error | Please reconnect power adapter, if the Err5 still appears, please contact the service department. |
| Err6 | Sensor unit Connect Error | Please reconnect sensor unit and redo power on, if the Err6 still appears, please contact the service department. |
| Err7 | temperature or humidity error | Please turn off power adapter, and put the device in a dry place more than 12 hours. |
| Err8 | Internal calculate error | Please reconnect power adapter, if the Err6 still appears, please contact the service department. |
Titan Controls® Atlas® 2 – Preset CO2 Monitor/Controller
Preset CO2 control at 1500 PPM. Built-in self-calibration feature. Easiest to use CO2 controller on the market. Simply plug in your CO2 generator or regulator and you are ready to go. Built-in photocell allows CO2 enrichment only during daylight hours. Durable powder-coated steel enclosure. 15 Amps maximum/120 V/ 60 Hz. Patent No. D657,748.
Titan Controls® Atlas® 1 – CO2 Monitor/Controller with Remote Sensor
Atlas® 1 CO2 Monitor/Controller comes with a 25 ft remote sensor. It features adjustable set point and elevation levels, a built-in self calibration function and an integrated photocell that enables operation in daytime hours only, when the plants need CO2. Simple to use and easy to operate. 15 Amps/120 V/ 60 Hz. Replacement sensor can be purchased separately. The sensor comes factory calibrated for precise CO2 readings and utilizes low voltage technology to avoid radio frequency interference (RFI) from electronic ballasts.
Titan Controls® Atlas® 3 – Day/Night CO2 Monitor/Controller
Controls and monitors CO2 from 0 to 2000 parts per million (PPM). CO2 enrichment or CO2 exhaust features. Easy to setup and operate. Enclosure resists dust, rust and moisture. 5 Amps maximum/120 V/ 60 Hz.
The Autopilot PPM-5 CO2 Controller is a simple and affordable way to control your CO2 injection device. Choose your desired CO2 parts per million (PPM) level, and the controller will automatically maintain that specified CO2 level. A built-in photocell located on the right side of the sensor automatically deactivates CO2 injection during the night time, and the unit’s digital display shows live CO2 levels. The display is green in color, which will not disturb photoperiod. A remote sensor with detachable 16′ cable allows close placement to the plant canopy.
FEATURES:
- Monitor & Control CO2 levels
- Photocell deactivates CO2 device during night cycle
- Digital display shows current CO2 levels 24/7
- Detachable 16 ft sensor cable
NOTE: If a longer sensor cable is desired use optional replacement:
- APRJ1250 – Autopilot 50′ RJ12 Cable
- OR replace with an RJ12 6 Conductor Telephone Cable at desired length
*This product is currently on backorder. Some alternate item codes that we offer are APC8200, APE3100 and NBPNG060. This note will be removed when inventory is available.
Autopilot APC8400 Digital CO2 Controller with Integrated Sensor
The new Autopilot APC8400 CO2 Monitor & Controller with Integrated Sensor offers a simple and affordable way to control, monitor, and record CO2 levels.
Operation modes are CO2 enrichment or CO2 exhaust. The new CO2 Exhaust mode will trigger an exhaust fan to reduce CO2 levels. This is an ideal safety function for humans working in confined spaces.
Trace your room’s CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8400 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want and how you want. The APC8400’s memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your indoor CO2 levels with this precision controller from Autopilot!
FEATURES AT A GLANCE:
- CO2 Enrichment or CO2 Exhaust
- Record and review past CO2 levels for accurate analysis
- CO2 Enrichment Function for tank/regulator setups & CO2 generators
- CO2 Exhaust Function with customizable setpoint (exhaust fan application)
- Controls and monitors CO2 from 0 to 5000 parts per million (PPM)
- Adjustable CO2 setpoint & deadband
- Integrated sensors include day/night detection
- During night cycle the green backlit screen will illuminate for 30 seconds when making selections
- 5′ power cord
iGrow 800 Greenhouse Controller
- Advanced control, affordable price
- Fully-programmable; expansion to 32 outputs
- Use your cell phone to monitor and change settings
- Get peace of mind with alerts for temperature, humidity, CO2 and more
- UL Listed for safety and easy permits
Get real-time energy use and track run-time on greenhouse heating and cooling equipment with this easy-to-use controller system. The iGrow 800 series offers eight different ouputs for fans, heaters, vents, irrigation, shade curtains (blackout curtains), and more – with Cloud access from any Internet-connected computer or smartphone.
Track your energy usage across 8 intelligently controlled outputs (expandable to 32) and adjust to increase your profit. Tools such as LinkConn Software expand the capabilities of this versatile line of controllers to further save energy and increase your profit.
No more programming and reprogramming every crop cycle or season change – with the iGrow 800 series USB data logging feature you can easily save settings to any USB flash drive. When the time comes to switch settings, simply insert your USB flash drive into your iGrow data. These are some of the new and innovative ways Link4 has provided to reduce setup times and reduce your labor costs.
Remote Cloud Access
Growers can monitor and change every aspect of the iGrow800 from the palm of their hand, using state-of the-art controls that relay secured, encrypted grow house data to the cloud where it is accessible on any Internet-connected device. The secured, encrypted server allows you to monitor and change settings remotely. With a wealth of data at their fingertips, growers are able to grow bigger, more vibrant crops under repeatable processes.
Easy Transition
This programmable controller offers integrated control for easy transition to an advanced, yet simple-to-use system. It is ideal for small or large greenhouse retrofits or new installations. Included communication module lets you link multiple greenhouses for control.
Loss Prevention
- The iGrow 800 protects their grow house investment with SMS text and email identifying a variety of threats, including spikes in temperature, humidity, and CO2.
- Emergency shut-off guards against power surge and overheating.
Privacy and Security
- Network architecture built to meet the requirements of the most security-sensitive organizations
- No data collected by the Cloud is shared to a third party
- User location data collected is anonymous and cannot be associated with a user account
- Tor and Anonymity Online Compatible
iPonic Commercial Controller – iPonic614 Single Zone
- Increase yields, lower electricity bill, save money
- Use your smartphone to monitor and change settings
- Get peace of mind with alerts for temperature, humidity, CO2 and more
- Pre-mounted, pre-wired, and pre-tested
- Suitable for 120v, 240v, 277v, 480v; up to 18 amps per circuit
- Integrates into any size UL Listed contactor or lighting panel
- NEMA4 enclosure; DISM sensor included
The iPonic 614 and 624 Commercial is designed for your convenience – pre-mounted, pre-wired, and pre-tested. Pre-mounted means an easier and cheaper installation process with no need for separate boxes with conduits in between. Pre-wired means it works as soon as you take it out of the box.
The iPonic Commercial enables growers to control a single or dual zone – with cloud-access from any Internet-connected computer or smartphone.
Unlike most controllers on the market, the iPonic Commercial controller allows total flexibility using software-based intelligence. This means that you can program all functions together and eliminate multiple controllers for multiple functions – the iPonic does it all: Fuzzy Logic CO2, light timer, irrigation, temperature, humidity, recycle timers, vent fans, high temperature shut-off, central air conditioning and heating – even add your own custom devices. This also means that you can change devices on the fly – add or delete devices to match the equipment in your grow house in minutes.
Controller includes a single (or dual) Digital Integrated Sensor Module (DISM). The sensor measures temperature, humidity, CO2 and lighting.
iPonic Commercial Controller – iPonic624 Dual Zone
- Increase yields, lower electricity bill, save money
- Use your smartphone to monitor and change settings
- Get peace of mind with alerts for temperature, humidity, CO2 and more
- Pre-mounted, pre-wired, and pre-tested
- Suitable for 120v, 240v, 277v, 480v; up to 18 amps per circuit
- Integrates into any size UL Listed contactor or lighting panel
- NEMA4 enclosure; DISM sensor included
The iPonic 614 and 624 Commercial is designed for your convenience – pre-mounted, pre-wired, and pre-tested. Pre-mounted means an easier and cheaper installation process with no need for separate boxes with conduits in between. Pre-wired means it works as soon as you take it out of the box.
The iPonic Commercial enables growers to control a single or dual zone – with cloud-access from any Internet-connected computer or smartphone.
Unlike most controllers on the market, the iPonic Commercial controller allows total flexibility using software-based intelligence. This means that you can program all functions together and eliminate multiple controllers for multiple functions – the iPonic does it all: Fuzzy Logic CO2, light timer, irrigation, temperature, humidity, recycle timers, vent fans, high temperature shut-off, central air conditioning and heating – even add your own custom devices. This also means that you can change devices on the fly – add or delete devices to match the equipment in your grow house in minutes.
Controller includes a single (or dual) Digital Integrated Sensor Module (DISM). The sensor measures temperature, humidity, CO2 and lighting.
