HM Digital Replacement TDS/EC sensor for HM-200
HM-200 TDS/EC Replacement Probe
- Replacement EC/TDS sensor for HM-200
Measures Conductivity and TDS
Measures Temperature
Probe: Heat-resistant ABS Material
Cable: 78.7" (2m)
Quest DEH 3000R Control
FEATURES
COMPATIBLE PRODUCTS
The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant’s entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 150 pints per day of ultra-fine mist. 115 V, 60 Hz and 2.7 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.
Ideal-Air™ Pro Series 60 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 60 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 60 pints (86°F, 80% RH); Power: 4.6 Amps/520 W; Supply Voltage: 115 V – 1 Phase – 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.
Our LBS-10 LeakBlock Sensor can be used for numerous applications to avoid flooding and unnecessary leaks. The LBS-10 LeakBlock Sensor is perfect for traditional applications: RO Systems, inlets of a Filter System, and individual Filters. The robust commercial design of our latching valve, enables the LBS-10 LeakBlock Sensor to be used for additional applications.
Temperature Range: 34 F°/1 C° – 145 F°/63 C°
Maximum Flow Rate: 6 GPM / 19 LPM
Maximum Pressure: 125 psi / 8.6 Bar
Connection: 3/8” FNPT x 1/2" MBSP (British Standard Pipe Male, NOT National Pipe Thread NPT)
Recommended fittings to connect the HM Digital LeakBlock Sensor to Hydrologic Systems:
The HM-100 is a pH/EC/TDS/Temp monitor ideal for all water quality testing, hydroponics, water purification applications, wastewater regulation, aquaculture, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment and more.
Measures Potential Hydrogen (pH), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Temperature
Four scales: pH, mS, ppm 0.5 (NaCl) Scale & 0.7 (442™) Scale
Automatic Temperature Compensation (ATC) using three temperature coefficients
Digital Calibration (push button) to any point within the meter’s range
Data-hold function (Max. 6 data values)
Large and easy-to-read LCD Screen
Displays 3 parameters (pH/EC or TDS/Temp) simultaneously
Replaceable Sensors (model SP-C2 for Conductivity, SP-P5 for pH)
Factory Calibrated (pH/EC/TDS), Includes power cable, pH 4 & 7 calibration solutions, pH storage solution