The Gavita Slim Line 2 (SL2) fixture features the W150 Reflector, which has a wide spread for optimal uniformity (150° beam angle). It’s designed to deliver high uniformity to give your plants ample coverage where they need it. The SL2 features highly efficient passive ballast cooling that helps contribute to long fixture life. Other features include sealed housing with a Gore-Tex® ventilation plug, and controllable output up to 1150 W. The SL2 is also equipped with a Repeater Bus interface. This double-port connection enables control of the SL2 with a Gavita EL Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains, giving you room to grow.
The Gavita Slim Line 2 (SL2) fixture features the W150 Reflector, which has a wide spread for optimal uniformity (150° beam angle). This reflector is best suited to overlapping plans. The SL2 features highly ecient passive ballast cooling that helps contribute to long fixture life. Other features include sealed housing with a Gore-Tex® ventilation plug, and controllable output up to 1150 W. The SL2 is also equipped with a Repeater Bus interface. This double-port connection enables control of the SL2 with a Gavita EL Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains, giving you room to grow.
Phantom double-ended technology drives maximum PAR value! The engineering excellence of Phantom ballasts is now incorporated into our new Phantom Commercial DE ballasts. Their high-frequency design is optimized for double-ended 1000W HPS lamps, and they feature a highly precise microprocessor and four-way output control. Totally silent, efficient and lightweight, they will power all doubled-ended reflectors on the market.
All 40 Series DE ballasts are fully compatible with the Autopilot PX1 Digital Lighting Controller (APDPX1). The PX1 provides centralized, dual-zone digital control of your DE lighting, allowing you to switch, dim and boost multiple (USB-compatible) Hydrofarm ballasts at once—up to 256 in each of two independent zones for a total capacity of 512 ballasts.
This model (PHB4020) is for 277V operation, is generator ready and FCC-compliant, and comes with instructions, USB to RJ12 cable, RJ12 to RJ12 cable, RJ12 splitter, and an 8-foot power cord.
FEATURES:
- High-precision microprocessor control
- Four-way dimming: 60%, 75%, 100%, and Super Boost (1150W lamp output)
- USB interface provides full compatibility with Autopilot PX1 Digital Lighting Controller
- Robust commercial design
- Superior reliability
- LED status indicator
- Internal RF shielding
- Patented ignition control
- End of lamp life signal
- Auto-restrike feature protects valuable lamps from damaging power interruptions
- Cooling fins for maximum heat dissipation
- Suitable for use in damp locations
- FCC certified
Remote (detached) use of reflectors with Phantom ballasts from the PHB4020 line should only be done with Hydrofarm brand reflectors having a built-in 15′ cord. The use of additional lamp extension cords, plug adapters, and non-Hydrofarm reflectors may not work with Phantom ballasts in remote applications.
INTERLUX 1500W EXTREME HPS Grow Lamp
InterLux EXTREME HPS bulbs are designed specifically for indoor growing. They have a light spectrum shifted towards the red, and are used during the flowering stages of growth. Tested and developed to work perfectly with electronic ballasts, these bulbs have an extremely high lumen output and a wide color spectrum for maximum yield. Standard E39 Base. 1 year warranty against original manufacturer defects. Works with electronic ballasts only.
215,000 LUMENS
Female reflector outlet on one end and open wiring on the other end. Can be used to replace or rewire reflector receptacle on a ballast.
*UL listed*
Case Quantity = 150
HF’s new Phantom CMh System combines our Phantom CMh reflector with the multi-voltage Phantom ceramic halide-specific digital ballast and the Philips double-jacketed Master Color 942 CDM Elite MW 315W T12 ceramic metal halide lamp.
Ceramic metal halide technology represents a major advancement in HID evolution. These lamps provide high-quality growth spectrum, amazing PAR per watt performance, and extra energy in the ultraviolet range—which all contribute to increased crop quality. Excellent maintenance of PAR/PPF over long lamp life means great value and far longer re-lamping intervals.
High efficiency along with high intensity and cutting-edge performance make the Phantom CMh System a smart choice.
• Excellent PPF (Photosynthetic Photon Flux)—1.95 µmol/s
• Longevity—90% PAR output at 8,000 hours and 20,000-hour average life
• Horticulturally-optimized spectrum and increased UV promote enhanced plant quality
• 4200K lamp included
• Double jacketed lamp does not require reflector safety lens
• Digital ballast features low frequency, square wave technology
• Multi-voltage: 120/208/240V
• Ideal for low ceilings/tents/vertical gardens
• 95% reflective European hammertone aluminum specular
• Optional cooling kit (PHR3150CKT) available (includes a lens system and two 6″ flanges)
Important: Hot re-strike can take up to 15 minutes. The lamp will take longer to cool down since it has two layers of glass. Please allow enough time for ignition. Philips recommends that you do not operate the lamp for less than 3 minutes or this can cause ignition issues.
HF’s new Phantom CMh System combines our Phantom CMh reflector with the multi-voltage Phantom ceramic halide-specific digital ballast and the Philips double-jacketed Master Power CDM Elite Agro 315W T12 ceramic metal halide lamp.
Ceramic metal halide technology represents a major advancement in HID evolution. These lamps provide high-quality growth spectrum, amazing PAR per watt performance, and extra energy in the ultraviolet range—which all contribute to increased crop quality. Excellent maintenance of PAR/PPF over long lamp life means great value and far longer re-lamping intervals.
High efficiency along with high intensity and cutting-edge performance make the Phantom CMh System a smart choice.
• Excellent PPF (Photosynthetic Photon Flux)—1.95 µmol/s
• Longevity—90% PAR output at 8,000 hours and 20,000-hour average life
• Horticulturally-optimized spectrum and increased UV promote enhanced plant quality
• 3100K lamp included
• Double jacketed lamp does not require reflector safety lens
• Digital ballast features low frequency, square wave technology
• Multi-voltage: 120/208/240V
• Ideal for low ceilings/tents/vertical gardens
• 95% reflective European hammertone aluminum specular
• Optional cooling kit (PHR3150CKT) available (includes a lens system and two 6″ flanges)
Important: Hot re-strike can take up to 15 minutes. The lamp will take longer to cool down since it has two layers of glass. Please allow enough time for ignition. Philips recommends that you do not operate the lamp for less than 3 minutes or this can cause ignition issues.
HF’s new Phantom CMh System combines our Phantom CMh reflector with the multi-voltage Phantom ceramic halide-specific digital ballast and the Philips double-jacketed Master Power CDM Elite Agro 315W T12 ceramic metal halide lamp.
Ceramic metal halide technology represents a major advancement in HID evolution. These lamps provide high-quality growth spectrum, amazing PAR per watt performance, and extra energy in the ultraviolet range—which all contribute to increased crop quality. Excellent maintenance of PAR/PPF over long lamp life means great value and far longer re-lamping intervals.
High efficiency along with high intensity and cutting-edge performance make the Phantom CMh System a smart choice.
• Excellent PPF (Photosynthetic Photon Flux)—1.95 µmol/s
• Longevity—90% PAR output at 8,000 hours and 20,000-hour average life
• Horticulturally-optimized spectrum and increased UV promote enhanced plant quality
• 3100K lamp included
• Double jacketed lamp does not require reflector safety lens
• Digital ballast features low frequency, square wave technology
• Multi-voltage: 120/208/240V
• Ideal for low ceilings/tents/vertical gardens
• 95% reflective European hammertone aluminum specular
• Optional cooling kit (PHR3150CKT) available (includes a lens system and two 6″ flanges)
Important: Hot re-strike can take up to 15 minutes. The lamp will take longer to cool down since it has two layers of glass. Please allow enough time for ignition. Philips recommends that you do not operate the lamp for less than 3 minutes or this can cause ignition issues.
Phantom double-ended technology drives maximum PAR value! The engineering excellence of Phantom ballasts is now incorporated into our new Phantom Commercial DE ballasts. Their high-frequency design is optimized for double-ended 1000W HPS lamps, and they feature a highly precise microprocessor and four-way output control. Totally silent, efficient and lightweight, they will power all doubled-ended reflectors on the market.
All 40 Series DE ballasts are fully compatible with the Autopilot PX1 Digital Lighting Controller (APDPX1). The PX1 provides centralized, dual-zone digital control of your DE lighting, allowing you to switch, dim and boost multiple (USB-compatible) HF ballasts at once—up to 256 in each of two independent zones for a total capacity of 512 ballasts.
This model (PHB4020) is for 277V operation, is generator ready and FCC-compliant, and comes with instructions, USB to RJ12 cable, RJ12 to RJ12 cable, RJ12 splitter, and an 8-foot power cord.
FEATURES:
- High-precision microprocessor control
- Four-way dimming: 60%, 75%, 100%, and Super Boost (1150W lamp output)
- USB interface provides full compatibility with Autopilot PX1 Digital Lighting Controller
- Robust commercial design
- Superior reliability
- LED status indicator
- Internal RF shielding
- Patented ignition control
- End of lamp life signal
- Auto-restrike feature protects valuable lamps from damaging power interruptions
- Cooling fins for maximum heat dissipation
- Suitable for use in damp locations
- FCC certified
Remote (detached) use of reflectors with Phantom ballasts from the PHB4020 line should only be done with HF brand reflectors having a built-in 15′ cord. The use of additional lamp extension cords, plug adapters, and non-HF reflectors may not work with Phantom ballasts in remote applications.
Gavita Controller Cables
Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.
