Hydro-Logic DM-2 Industrial Dual TDS Monitor (HLTDS)
Measure the untreated water coming in vs. the purified water going out of your Reverse Osmosis system at any time. This is important in determining when the RO membranes need to be changed.
Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds.
90 ppm, the resolution is in 10 ppm increments, indicated by a blinking 'x10' image.
Factory calibrated: all meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated.
Comes equipped with a 1/2" inlet and 3/8" outlet. Quick Connect T-fittings for Merlin-Garden Pro or Tall Blue-Merlin for quick install.
| ||Manufacturer's Product Information || |
|MSRP each $||75|
|Dimensions||1.5 x 1 x 3.2|
Note: Calibration Buffer Solutions are available separately.
— Ships from HF: OR, CA, CO, PA, TX, FL USA.
|Specifications for DM-2 Industrial Dual TDS Monitor hf-HLTDS:|
| ||EACH Packaged ||CASE ||PALLET|
|UPC: ||812111010232 || || |
|Volume: ||0.04 ||0.1 || |
|Dimensional Weight: ||0.38 ||1.49 || |
|Weight (lbs): ||0.77 ||2.4 || |
|Approx Length (inches): ||7.2 ||8.1 || |
|Approx Width (inches): ||5.1 ||6.5 || |
|Approx Height (inches): ||1.7 ||4.7 || |
For more information, please visit the manufacturer Hydro-Logic's website.