Active Aqua Float Valve with Wing Nut (AARO802)
These Active Aqua float valves are made with NSF-approved PVCD and 18-8 stainless steel hardware. They are recommended for use with a hydraulic automatic shutoff valve or as a top-level control. Includes jam nut, sealing washer, JACO compression nut, and polyethylene float. Adjustable arm can be used vertically or horizontally. Santoprene® rubber seals are long-wearing, chemical-resistant, and replaceable.
- ¼" tubing inlet and free flow outlet
- Flow rate of 1.5 GPM at 40 PSI - tested to 100 PSI
- Flange to float tip measurement is 6.5 - inlet adds approximately 1" to overall length
| ||Manufacturer's Product Information || |
|MSRP each $||16.95|
|Dimensions||2 x 2 x 4|
— Ships from HF: OR, CA, CO, PA, TX, FL USA.
|Specifications for Active Aqua Float Valve w/ Wing Nut hf-AARO802:|
| ||EACH Packaged ||CASE ||PALLET|
|UPC: ||638104005593 || || |
|Volume: ||0.01 || || |
|Dimensional Weight: ||0.14 || || |
|Weight (lbs): ||1 || || |
|Approx Length (inches): ||6 || || |
|Approx Width (inches): ||2 || || |
|Approx Height (inches): ||2 || || |
For more information, please visit the manufacturer HydroFarm's website.