The Autopilot PPM-5 CO2 Controller is a simple and affordable way to control your CO2 injection device. Choose your desired CO2 parts per million (PPM) level, and the controller will automatically maintain that specified CO2 level. A built-in photocell located on the right side of the sensor automatically deactivates CO2 injection during the night time, and the unit's digital display shows live CO2 levels. The display is green in color, which will not disturb photoperiod. A remote sensor with detachable 16' cable allows close placement to the plant canopy.
- Monitor & Control CO2 levels
- Photocell deactivates CO2 device during night cycle
- Digital display shows current CO2 levels 24/7
- Detachable 16 ft sensor cable
NOTE: If a longer sensor cable is desired use optional replacement:
- APRJ1250 - Autopilot 50' RJ12 Cable
- OR replace with an RJ12 6 Conductor Telephone Cable at desired length
— Ships from HF: OR, CA, CO, PA, TX, FL USA (No USPS).
|Specifications for PPM-5 CO2 Controller (12/cs) hf-APCECO2:|
| ||EACH Packaged ||CASE ||PALLET|
|UPC: ||638104017404 ||10638104017401 || |
|Volume: ||0.09 ||2.06 || |
|Dimensional Weight: ||0.96 ||21.4 || |
|Weight (lbs): ||0.65 ||11 || |
|Approx Length (inches): ||8 ||22 || |
|Approx Width (inches): ||5 ||17 || |
|Approx Height (inches): ||4 ||9.5 || |
For more information, please visit the manufacturer HydroFarm's website.