Calibration and conductivity standard solutions... a must in every grower's toolbox.
The Bluelab calibration and conductivity standard solutions are essential for use with all Bluelab
products for the calibration of pH and testing the cleanliness of the Bluelab Conductivity/Temperature probe.
Bluelab solutions are manufactured specifically for Bluelab products and are referenced to high laboratory standards to ensure your Bluelab products last longer and maintain accuracy.
Bluelab's EC/CF equipment does not need calibrating as they are all factory calibrated here at Bluelab. The CF27.7 (EC2.77) solution is used as a reference or
checking solution to ensure you have adequately cleaned the EC/CF probe.
Contamination between solutions can easily occur, which will affect the validity of the calibration. Bluelab recommend that the solutions are de-cantered into a smaller vessel and the contents discarded when the calibration process has been completed.
Note: Calibration Buffer Solutions are available separately.
This item is sold individually. The case size is listed for your convenience for instances where you wish to order in case quantities.
— Ships from HF: OR, CA, CO, PA, TX, FL USA.
|Specifications for pH 7.0 Calibration Sol 250 ml hf-BLU7250:|
| ||EACH Packaged ||CASE ||PALLET|
|UPC: || ||9421024920449 || |
|Volume: ||0.01 ||0.11 || |
|Dimensional Weight: ||0.12 ||1.14 || |
|Weight (lbs): ||0.5 ||4.21 || |
|Approx Length (inches): ||2.1 ||7.48 || |
|Approx Width (inches): ||2 ||5.12 || |
|Approx Height (inches): ||4.9 ||4.96 || |
For more information, please visit the manufacturer Bluelab's website.